SERVICE MANUAL
Sony Video & Sound Products Inc.
9-896-479-01
2018B33-1
©
2018.02
C-100
SPECIFICATIONS
CONDENSER MICROPHONE
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Chinese Model
Ver. 1.0 2018.02
General
Type 2 Way Microphone (Condenser + Electret condenser)
Power supply External power supply operation 44 V to 52 V DC (IEC* 61938 P48)
Power consumption Less than 4.5 mA
Output connector XLR-3-12C Type
Dimensions 40 mm dia. × 175 mm (1.57 in. dia. × 6.89 in.)
Mass Approx. 290 g (10.2 oz)
Supplied accessories Cradle suspension (1)
Wind screen (1)
Stand adaptor (W3/8 - NS5/8) (1)
Carrying case (1)
Operating instructions (1)
Warranty card (1)
Performance
Frequency response 20 Hz - 50,000 Hz
Directivity Uni-directional / Omni-directional / Bi-directional (switchable)
Output impedance 90 Ω ±15%, balanced
Sensitivity -31 dB (Uni-directional)
-37 dB (Omni-directional)
-35 dB (Bi-directional)
(deviation±3 dB)
(0 dB=1 V/Pa, 1 kHz)
Inherent noise Less than 19 dB SPL (Uni-directional)
Less than 24 dB SPL (Omni-directional)
Less than 22 dB SPL (Bi-directional)
(0 dB=2 × 10
-5
Pa)
(IEC* 61672-1 A-Weighted, 1 kHz, 1 Pa)
Maximum input sound pressure level
More than 132 dB SPL (Uni-directional)
More than 138 dB SPL (Omni-directional)
More than 136 dB SPL (Bi-directional)
(output level for 1% waveform distortion at 1 kHz, converted into
equivalent input sound pressure level: 0 dB=2 × 10
-5
Pa)
Dynamic range More than 113 dB (Uni-directional)
More than 114 dB (Omni-directional)
More than 114 dB (Bi-directional)
PAD 0 dB/-10 dB (switchable)
LOW CUT filter Flat/70 Hz (switchable)
* IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.