Need help?Do you have a question about the Sony CDP-C225 and is the answer not in the manual?
Covers fire, shock, laser hazards and unplugging the unit for safety.
Section for recording model and serial numbers for service reference.
Instructions for using the transit key to protect the optical system.
Details FCC compliance and Canadian cautions regarding interference.
Overview of listening modes, tape editing, and display functions.
Introduces operational differences between the CDP-C425, C325, and C225 models.
General safety measures for operation, handling, and electrical safety.
Advice on conserving energy and extending the unit's useful life.
Advice on positioning the unit for proper ventilation and avoiding heat sources.
Instructions on handling moisture buildup on the lens.
Steps for making correct connections, including power and slack.
Diagram and instructions for connecting the CD player to an amplifier.
Identifies buttons and indicators on the front panel for CDP-C425 and CDP-C325/C225.
Identifies buttons on the remote commander for CDP-C425/C325 models.
Instructions for inserting batteries and notes on battery life and care.
Explains how to stop, pause, resume playback, and open the disc tray.
Details features like starting from selection beginning and listening with headphones.
Important notes on handling discs, including cleaning and storage.
Explains various information shown on the display during playback.
Explains specific indications like 'no disc' or selection numbers.
How to choose a specific disc or skip to the next disc.
Finding specific tracks using AMS or direct number entry.
Using manual search to find specific audio points within a track.
How to start, stop, and cancel shuffle play for random playback.
How to choose specific discs for random playback.
How to select and order tracks for playback in a desired sequence.
Using Program Edit to specify playing time and optimize selection.
Instructions for programming selections for tape side B.
How to change, erase, or check programmed selections.
Viewing programmed selections and remaining time.
Designating desired recording time for tapes, commercial or free length.
Instructions for editing both sides of a tape using the Time Edit function.
How to add selections using the LINK function to fit remaining time.
Playing, stopping, cancelling, and erasing Time Edit programs.
Designating time per side and handling discs with over 20 selections.
How to repeat a disc, a single selection, or the current playback mode.
How to turn off repeat playback by pressing the REPEAT button.
How to scan selections on a disc to preview tracks.
Starting, stopping, and notes for using the Music Scan function.
Setting fade times for audio recording, between 2-10 seconds.
Fading out audio after a specific designated duration.
Locating and playing the loudest portion of a disc for recording.
How to set, stop, and start Peak Search.
Information on how Peak Search determines the loudest portion.
Instructions for cleaning the unit's exterior with a soft cloth.
How to clean compact discs by wiping from the center out.
Technical details of the CD player, including laser and frequency response.
Details on power requirements, dimensions, weight, and supplied accessories.
Diagnosing and resolving issues with no sound output from channels.
Troubleshooting problems with disc playback not starting.
Resolving problems with the remote commander not operating the unit.
Steps for when the unit does not respond to any operations.
To Next Page
General
