Need help?Do you have a question about the Sony CDP-C215 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Disc format | CD |
| Number of Discs | 5 |
| D/A Converter | 1-bit |
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 100 dB |
| Output Voltage | 2 V |
| Dimensions (WxHxD) | 430 x 100 x 290 mm |
Covers various playback modes and functions for editing tapes.
Explains disc scanning features and how information is displayed.
Highlights operational and functional differences between CDP-C315, CDP-C215, and CDP-C211.
Instructions on where and how to place the CD player for optimal operation and ventilation.
Guidelines for making proper audio and power connections to the CD player.
Illustrates the wiring diagram for connecting the CD player to an amplifier and speaker system.
Identifies and explains the buttons and indicators on the front panel of the CD player.
Details the functions of each button on the remote commander.
Instructions on how to install batteries and important notes on their use and care.
Instructions on how to pause, stop, or resume playback.
Warning about potential speaker damage from sudden volume changes.
How to connect headphones and adjust volume using the player's control.
Guidelines for proper handling and care of compact discs.
Explains how to view elapsed time, remaining time, and total time during playback.
Clarifies when total remaining time is available or displayed.
How to choose a specific disc from the player's trays.
How to find specific tracks or points using AMS and manual search.
Instructions on how to play selections in a random order.
How to choose specific discs to be included in the shuffle play sequence.
Step-by-step guide to programming up to 32 selections in a desired playback order.
How to stop, resume, cancel, or check programmed selections.
Designating the desired length of a tape side for automatic programming.
How to add more selections to fit the remaining time and manage the program.
How to repeat a single disc, all discs, or a single selection.
Instructions on how to turn off the repeat play function.
How to check selections by scanning the beginning of each track on a disc.
How to stop the music scan playback.
How to set fade in and fade out times for tape editing.
Setting a specific duration for the playback to fade out.
How the unit scans to find and play the loudest portion for recording adjustment.
Information on how peak search determines the loudest portion and potential variations.
Instructions for cleaning the exterior of the CD player.
Proper methods for cleaning compact discs before playback.
Technical details of the CD player including laser, frequency response, and outputs.
Details on power requirements, consumption, dimensions, and weight.
Information on the remote control system and supplied accessories.
Troubleshooting steps for problems like no audio or play not beginning.
Steps to resolve issues where the remote commander is unresponsive.
Troubleshooting for when any operation on the unit is not possible.
To Next Page
