Sony CDP-C365 Service Manual

SERVICE MANUAL
Photo : CDP-C265
CDP-C265/C365
US Model
Canadian Model
AEP Model
UK Model
Australian Model
CDP-C265/C365
E Model
CDP-C365
CDP-C235/C335
CDM27A1-5BD13
BU-5BD13
Compact Disc Player
System
Laser
Wavelength
Frequency response
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Output
LINE OUT
(phono jacks)
General
Power requirements
Power consumption
Dimensions (w/h/d)
SPECIFICATIONS
Compact disc digital audio system
Semiconductor laser
780-790 nm
2 Hz-20 kHz (+0.5 dB)
More than 102 dB
More than 98 dB
Less than 0.0045%
More than 100 dB
Output level 2 V (at 50 kilohms)
Load impedance over 10 kilohms
Model for US and Canadian
120V AC, 60Hz
Model for AEP, German, UK,
Singapore, Malaysia 220 — 230V AC,
50/60Hz
Model for Australian 240V AC,
50/60Hz
Model for E
110—120V, 220—240V AC, 50/60Hz
14W
Approx. 430 x 125 x 385 mm
(17 x 5 x 151/4 inches)
Including projecting parts and controls
Mass
Remote Commander
Remote control system
‘Power requirements
Dimensions
Mass
Supplied accessories
KSS-240A
Approx. 5.6 kg, net
(12 Ibs 60z)
RM-D335 (CDP-C365 only)
Infrared control
3 V DC with two size AA batteries
(IEC designation R6)
45 x 185 x 20 mm (w/h/d)
(1 13/16 x 7 3/8 x 13/16 inches)
100 g (3.5 oz) including batteries
Audio signal connecting cord
(phono plug x 2 — phono plug x 2) (1)
Remote commander (1) (CDP-C365 only)
Sony SUM-3 (NS) batteries (2) (CDP-C365 only)
AC plug adaptor (1) (CDP-C365 E model only)
Design and specifications are subject to change without
notice.
COMPACT DISC PLAYER
SONY.

Sony CDP-C365 Specifications

General

Brand	Sony
Model	CDP-C365
Category	CD Player
Language	English

Summary

SPECIFICATIONS

Compact Disc Player Specifications

Technical specifications for the CD playback system, including laser, frequency response, and signal quality metrics.

SECTION 1 GENERAL

Front Panel and Remote Parts Identification

SECTION 2 DISASSEMBLY

Case, Bottom Plate, Front Panel Disassembly

Back Panel and Disc Table Disassembly

Optical Pick-up Block Assembly

Details the process for disassembling the optical pick-up block.

SECTION 3 ELECTRICAL BLOCK CHECKING

S Curve Check Procedure

Procedure for checking the S-curve waveform for focus and tracking servo performance.

E-F Balance Check Procedure

Method for checking the E-F balance, ensuring symmetry in the waveform.

RF Level Check Procedure

Steps to measure the RF signal level using an oscilloscope.

RF PLL Free-run Frequency Check

Procedure to verify the free-run frequency of the RF PLL circuit.

SECTION 4 DIAGRAMS

System Block Diagram

A high-level block diagram illustrating the functional connections between major circuit blocks.

Semiconductor Lead Layouts

Printed Wiring Board Layouts

BD Board Schematic Diagram

Comprehensive schematic diagram detailing the electrical circuits of the BD board.

IC Block Diagrams

IC101 Pin Functions

Detailed list of pin functions for IC101 (CXD2515Q), covering its role in servo and EFM processing.