Sony CDP-C500 - Selecting a Desired Disc; Selecting a Specific Disc; Moving to the Next Disc; Fading in;Fading out

Selecting a Desired Disc
By using the DISC 1 to 5 buttons or the DISC SKIP button
during play, you can locate the beginning of any disc.
To select a particular disc
(for CDP-C500/
C44 only)
To move to the disc tray next] Press DISC SKIP.
to the current one
Locating a Particular Selection
Locating a selection in sequence (Automatic Music
Sensor)
You can locate the beginning of a selection on the disc
being played.
To locate the beginning of Press K44 once.
the selection being played
To locate the beginning of Press PPI once.
the next selection
Continue to press until the selection you wanted has been
located.
Press the corresponding
DISC 1 to 5 button.
Locating a Particular Point
in a Selection (for CDP-C500/C44 only)
Locating a point in sequence (Manual Search)
You can locate a particular point in a selection during play
by monitoring the high-speed sound.
To go back at high speed Keep 4 pressed.
To go ahead at high speed | Keep >» pressed.
Release the button when you reach the point in the
selection you want.
To locate at high speed
Press <4 or pm in the pause mode. Search speed will
increase three times, but there will be no sound. Find the
desired point by watching the numbers in the display.
ar-VellereMlsvAm-cellele meleis
You can have the play fade in and fade out for 5
seconds.
To end the play fading out
Press FADER when you want to start fading out.
Il , flashes in the window, and play fades out for 5 seconds
and enters the pause mode.
To restart the play fading in
Press FADER.
p» flashes in the window, and play fades in for 5 seconds.