Need help?Do you have a question about the Sony CDP-C445 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Frequency Response | 2 Hz - 20 kHz |
| Total Harmonic Distortion | 0.003% |
| Digital outputs | Coaxial, Optical |
| Output Voltage | 2V |
| Disc format | CD |
| Line output | 2V |
| Dimensions | 430 x 280 x 90 mm |
Instructions for unpacking the CD player and verifying all supplied accessories are present.
Guidance on choosing a suitable environment for the CD player to ensure proper operation and prevent damage.
Step-by-step guide for inserting batteries into the Sony remote commander for operation.
Important considerations for making secure and noise-free connections between audio components.
Diagram and instructions for connecting the CD player to an amplifier and speaker system.
Details on connecting the player via the optical digital output for audio transmission.
Detailed labeling and description of all buttons, indicators, and the display on the player's front panel.
Explanation of each button on the remote commander and its corresponding function on the CD player.
Steps to initiate continuous playback starting with the first track on the loaded disc.
How to select the initial disc and manage playback modes like ALL DISCS or 1 DISC.
Instructions for connecting headphones and playing compact 8 cm discs.
Methods to check the total number of tracks and total playing time for discs.
Explanation of various symbols and messages shown on the player's display, including 'no disc'.
Methods to directly access desired tracks using numeric buttons or sequential scan.
Using search functions to find specific moments within a playing song.
Procedure for swapping discs without interrupting the current playback session.
Key information and precautions to follow when using the disc exchange feature.
How to create smooth transitions by fading music in or out during playback.
Customizing the length of time for the fade-in or fade-out effect.
Playing tracks in a random order from all loaded discs or specific chosen discs.
Instructions on starting, stopping, and canceling shuffle play mode.
Setting a specific sequence for discs and tracks to be played.
Steps for error correction, checking total time, and handling program entries.
Procedures for clearing stored programs or stopping current program playback.
How program play interacts with continuous and shuffle playback modes.
Understanding how disc replacement affects stored program selections.
Using disc programs to record selections onto cassette tapes, divided by side.
Verifying programmed tape sequences and making necessary modifications.
Listening to the start of each track on a disc to preview selections.
How the music scan function operates within continuous, program, and shuffle play.
Instructions for initiating, stopping, and adjusting the duration of track sampling.
Setting the player to continuously loop playback of all tracks or entire discs.
How to set the player to repeat only one specific track.
Steps to disable the repeat playback function and return to normal play.
Locating the peak audio input levels on a disc for optimal tape recording setup.
How to start, stop, and navigate the peak search function.
Important considerations and restrictions for using the peak search feature.
Specifying the desired total recording time for a cassette tape side.
Entering specific time durations for recording onto side A or side B of a tape.
How the player automatically links tracks to fit the programmed tape duration.
Procedures for discontinuing or clearing time edit settings.
Understanding scenarios where the time edit feature cannot be applied.
Configuring and initiating a gradual fade-out at the end of a specified playback duration.
Setting the target duration for the time fade function to operate.
How to stop or disable the time fade feature during playback.
Creating a 'Delete Bank' to mark selections that should be skipped during playback.
Steps to store, manage, and create delete banks for discs.
Procedures for changing delete bank contents or restoring deleted selections.
How the player skips deleted selections when playing discs with active delete banks.
Steps to remove delete banks from memory for individual discs.
Actions to take when the player's memory for delete banks becomes full.
Instructions for cleaning the CD player's cabinet, controls, and discs safely.
Detailed technical data including system, outputs, power, and dimensions of the player and remote.
Solutions for issues like the disc tray not closing or playback failing to start.
Resolving 'no disc' messages, sound absence, and display indicator problems.
Troubleshooting tips for remote control malfunctions and general operational errors.
Important reminder regarding potential operational issues due to power supply conditions.
To Next Page
