Sony CDP-C445 - Program Play Advanced Functions; Erasing and Cancelling Programs; Program Play in Other Modes; Program Management with Disc Changes

3-B |
2) Press 144 or PPI to choose a selection to be
programmed, then press PROGRAM.
Repeat this to choose another selection.
— Before you press PROGRAM, you can check the
total playing time and change the selection to be
programmed. (Program Edit)
Program play starts.
To stop play
Press @.
You can play the same program repeatedly until you erase
the program.
To erase the program
Hold down CLEAR until “ALL CLr’ appears in the display.
00006
Ce) CEE
To cancel program play
Press CONTINUE to return to continuous play mode.
To recall the program you have made, press PROGRAM
again.
To make a program during play
Press PROGRAM, then follow step 3-A or 3-B. The program
will be played after the current selection.
If the total playing time does not appear (only “STEP” appears)
You have programmed a selection number greater than 20 or the total
playing time exceeds 199 minutes and 59 seconds.
If you press PROGRAM during continuous or shuffle play
If a program has been stored, it will be played after the current selection.
If you replace discs
The program is stored until you erase it. If you replace discs, the program
operates on the new discs. The selection numbers not existing on the disc
are deleted trom the program and the rest are played in the programmed
order.
if you turn off the player
The program is not erased. It is stored until you erase it.
15