Sony CDP-C445 - Disc Selection and Information Display; Choosing Starting Disc and Playback Modes; Headphone Use and 8 cm CD Playback; Viewing Disc and Track Information

To select the disc from which the playing starts
There are two ways.
a) To scan discs, press or hold down DISC SKIP.
b) To select a particular disc directly, press the
corresponding DISC 1-5 button.
Notes on ALL DISCS and 1 DISC
¢ If you choose ALL DISCS, all the discs in the player are played
consecutively. An empty disc compartment is skipped.
+ If you choose 1 DISC, only one disc is played. ,
Notes on disc tray
e Place a disc in the empty disc compartment only when it is in the front
loading position. Otherwise, the player may not be able to find the disc.
+ Always close the disc tray when not using the player to prevent dust from
entering the unit. l
e Place the disc properly in the disc compartment to prevent the disc from
being damaged.
When listening with headphones
Connect the headphones to the PHONES jack and adjust the
volume with the PHONE LEVEL control on the player.
To play an 8 cm (3-inch) CD
Place it in the inner circle in the disc compartment. If the disc
is provided with an adaptor, first remove it. Do not put a
normal CD (12cm/5-inch) on top of an 8 cm (3-inch) CD.
Information Display
Checking the total number of selections and total
playing time of the disc to be played.
There are two ways to check.
a) Place the disc in the disc compartment in the front loading
position, then press & or the disc tray itself to close it.
b) Press TIME on the player during stop. To check another
disc, press DISC SKIP, then press TIME.
“DO IOS
ose MN
$ ir
tort 6G. ug Co) CO
Disc number Total number Total playing Music calendar
selectedto of selections time of the
be played on the current disc
(current disc) current disc i
Notes on “(9 2...” in the display
¢ The red circle around a disc number indicates the disc is ready to be
played.
The red circle moves each time you press DISC SKIP.
e When all the selections on a disc have been played, the semi-circle around
the disc number disappears.
e When a compartment is recognized as empty, the semi-circled disc
number disappears.
Changing the display
Each time you press TIME during play, the display changes
to give you the following information:
Elapsed time in the selection
being played (current selection)
Current selection number
Remaining time in the current selection.
If the current selection number is
greater than 23, “- —.— —" appears
TIME Total remaining time on the current
disc (does not appear in shuffle
Th or program mode)
Notes on the information display
e Total remaining time is only available in the continuous play mode.
e Total remaining time will appear if the time fade function is set during
program or shuffle play.
What is this indication?
ee SANE
pth Leb te
This indication appears when all disc compartments are empty.