Sony CDP-C445 - Connecting Your CD Player System; General Connection Notes; Amplifier and Speaker System Setup; Using the Digital Optical Output

Hooking Up the System
N
Notes on Connection
e Turn off the power to each unit before making connections. e Leave a little slack in the connecting cord to allow for
Connect the AC power cord last. : inadvertent shock or vibration.
e Be sure to insert the plugs firmly into the jacks. Loose e Cord plugs and jacks are color coded:
connections may cause hum or noise.. Red plugs and jacks are for the right channel (R) and white
ones for the left channel (L).
Connecting an Amplifier
LINE OUT
ATE, [cal 4
Using DIGITAL OUT (OPTICAL)
A When connecting to an amplifier or D/A
; converter with OPTICAL IN, connect
= the OPTICAL IN and the DIGITAL OUT
4a = (OPTICAL) on the player with the
POC-15 Audio Fiber Optical Cable
to an AC outlet (not supplied).
Pip > Pea.
Take off the cap Plug in firmly
Speaker system
SPEAKER
Amplifier
to an AC outlet
Notes on DIGITAL OUT (OPTICAL)
* When using the DIGITAL OUT (OPTICAL), fade out, fade
in and time fade functions do not work.
* Noise may occur when playing non-music discs.