Sony CDP-CX270 - Page 11

Basic Operations
Press ENTER to start playing.
5 The selected disc is set to the playing position, and the player
plays all the discs from the selected one (ALL DISCS) or all the
tracks once (1 DISC).
Adjust the volume on the amplifier.
¢ When you turn off the player To stop playback
The player remembers the
last playing disc and the Press fl.
play mode [Continuous,
Shuffle (see page 18) or OPEN KK/D>>1 ENTER
Program (see page 18)].
When you turn on the
player again, therefore, the
player is ready to play the
same disc in the same play
mode>~
> Wl a
To Press
Pause m1]
Resume playing after pause Worl
Go to the next disc [Ff] _ DISC SKIP + once.
Hold down the button to skip discs.
Go back to the preceding disc [Ff] DISC SKIP ~ once.
. Hold down the button to skip discs.
Go to the next track Para
Go back to the preceding track KN
Stop playing and remove the disc OPEN and then ENTER. The disc comes
to the loading position.
11