Sony CDP-CX270 - Sorting Out Discs in Three Ways

14
Playing CDs
Selecting a disc when connected to the
second player
1 Press PLAYER SELECT to select the player in
which the disc you want is inserted.
When you select the second player, “2nd
PLAYER” appears in the front panel display.
2 Select the disc you want following the procedure
in “Selecting a disc on the player” or “Selecting a
disc directly using the remote.”
Locating a disc by scanning each disc title
(Memo Scan) [#|
You can locate a disc you want to play quickly by
scanning the disc titles (see page 23) in the front panel
display and start playing.
Note that you cannot use this function in ALL DISCS
Shuffle Play mode.
1 Press MEMO SCAN.
“MEMO SCAN” appears and the disc titles scroll
in the front panel display.
To cancel Memo Scan
Press MEMO SCAN again.
2 Press > when the disc title of the disc you want
to play appears.
The disc is set to the playing position, and the
player starts playing.
In Program Play mode, the disc will be added to
. the end of the program if you press the ENTER
button instead of the [> button.
‘Note
If “NO ENTRY” appears in the front panel display, no disc
has been labeled with disc titles. Try the Memo Scan function
again after labeling the discs with disc titles (see page 23).
Sorting Out Discs in Three
Ways (Sort)
When locating discs, you can select three sorting
methods, by disc number, disc title and artist name.
SORT ENTER JOG
ENTER
SORT
t/€/4
Each time you press the SORT button, the sorting
method changes as shown below.
Disc number ——————-> Disc title
| Press SORT.
Artist name
‘Press SORT. Press SORT.
When you sort by — The display shows the discs in
Disc number Numerical order of the disc numbers
Disc title* Alphabetical order of the disc titles
Artist name* Alphabetical order of the artist names
* Label discs to sort them by disc titles and artist names (see
“Labeling Discs” on page 23).