Sony CDP-CX270 - Playing Using a Timer; Using a Sony Receiver With On-Screen Control

22
Playing CDs
To cancel X-Fade Play
Press X-FADE again.
Notes
* You cannot use the Sort and Group Play functions during
X-Fade Play.
* During X-Fade Play, the PLAYER SELECT, INPUT and
ENTER buttons and the JOG dial do not work.
* You cannot use the X-Fade Play function when connected
to the CD player CDP-CX153.
Playing Using a Timer
You can start playing a disc at any time you want by
connecting a timer (not supplied). Please also refer to
the instructions for the timer if you need help. ~
TIMER Play mode buttons
1 Press one of the play mode buttons to select the
play
play mode you want.
2 = Set TIMER on the player to PLAY.
3 Set the timer to the time you want.
The player turns off. When the set time comes, the
player turns on and starts playing.
4 After you are finished using the timer, set TIMER
on the player to OFF.
a |
Using a Sony Receiver With
the On-Screen Display Control
Function
If you have a Sony receiver (amplifier) with the on-
screen display control function, you can control the
player using the remote supplied with the receiver
(amplifier).
1 Connect the player to the VIDEO jack on the
receiver (amplifier), and register the IR code of the
jack to which this player is connected as
“CONTROL Ai/CD2.”
2 Click LIST on the on-screen display using the
remote supplied with the receiver (amplifier).
The on-screen display changes to the CD player
information display.
3 Click EXIT to return to the receiver (amplifier)
information display.
For details on this function, refer to the instructions
supplied with the receiver (amplifier).
Notes
When the CD player information display does not fit inside
the receiver's (amplifier’s) on-screen display control panel,
adjust the position using the GRAPHIC POSITION function
on the receiver (amplifier).
The CD player information display may return to the
receiver (amplifier) information display while playing
discs, depending on the connected receiver (amplifier).
There might be a difference between the remote’s
sensitivity (FEELING) with the CD player information
display and the receiver (amplifier) information display.