Sony CDP-CX270 - Page 25

Storing Information About CDs (Custom Files)
Labeling discs/tracks using the remote [f!
DISC/CAPS TRACK/SPACE
GROUP/DEL
Number
buttons
ENTER
(NPUT CLEAR
ty
Hed (1
Select a disc following Steps 1 and 2 in “Selecting a
disc directly using the remote” on page 13, then press
ENTER.
Press INPUT.
Press */¥ repeatedly until the item you want
(DISC MEMO, ARTIST NAME or the track
number) appears in the front panel display, then
press ENTER.
When you select ARTIST NAME, press ENTER
again.
The flashing cursor (4) appears.
Press DISC/CAPS to find the letter type you want.
Each time you press the button, the letter type
changes cyclically among capital letters (AB),
lower case letters (ab) and numbers (12). The
selected letter type appears in the upper right
corner of the front panel display.
Press the number button corresponding to the
character you want (indicated beside each number
button).
The cursor disappears and the first space for the
Disc Memo flashes. - :
Each time you press the button, the character
changes cyclically among the ones indicated
beside the button.
sty
e
Characters assigned to
each number button
Example: To select the letter E
Press the number button 3 twice.
i
To insert a space, press TRACK/SPACE once.
To input a number, press DISC/CAPS twice in
Step 4, then press the number button you want.
To input symbols, press the number button 1
repeatedly until the symbol you want appears in
the front panel display.
+D >F
a"
Press 3. Press 3.
Press 3.
Press ENTER to select the character.
The selected character lights up, and the flashing
cursor appears to indicate the next space to be
input.
You can also go to the next space by pressing other
number buttons.
Repeat Steps 4 through 6 to input more characters.
If you want to assign the other information (disc
title, artist name or track titles) to the same disc,
repeat Steps 2 through 7.
Press INPUT to store the Disc Memo.
The Disc Memo lights up in the front panel
display.
Repeat Steps 1 through 8 to assign Disc Memos to
other discs.
You can change the disc to which you want to
assign Disc Memo by pressing the €/% buttons in
Step 3.
You can select the artist name without inputting
when labeling another disc by the same artist
After pressing the ENTER button in Step 3 above, press
the €/% buttons until the artist name you want appears
in the front panel display. Press ENTER to select the
artist name for the current disc.
25