Sony CDP-CX55 - Playing CDs: Creating Custom Programs; Specifying Next Disc in Shuffle Play; Creating Your Own Program (Program Play)

— 17 —
3-3. CD MECHANISM DECK
5 Two screws
(BVTT3x10)
!∞ Connector
TABLE SENSOR
board: CN52
!™ Screw
(BVTT3x10)
1 Screw
(PTPWH2.6x8)
2 Table (50)
3 Two screws
(BVTP3x8)
4 Ring (B)
!¡ CD mechanism deck
7 Connector
DISC SENSOR (S) board: CN53
8 Flat type wire (16 core)
BD board: CN102
6 Screw (BVTT3x10)
9 Flat type wire (9 core)
BD board: CN103
!º Connector
SW board: CN54
!¢ Connector
TABLE SENSOR board: CN51
!£ Connector
MOTOR board: CN61
!§ CD mechanism base unit
3-4. BASE UNIT AND MAGNET HOLDER
Remove in the arrow direc-
tion while pressing the claw
with a screwdriver, etc.
3 Screw
(BTP2.6x10)
4 Magnet holder
1 Two screws
(BTP2.6x8)
Remove in the arrow direc-
tion while pressing the claw
with a screwdriver, etc.
8 Tension coil spring (F-2)
9 BU holder assy
0 Torsion spring (Holder)
!¡ Base unit
6 Two screws
(PTPWH2.6x8)
5 Two screws
(PTPWH2.6x8)
7 Tension coil
spring (F-1)
2 Reinforcement assy