9
Receiving a station through a list
— LIST
You can list up the frequency.
1 Select the band, then press (LIST).
The frequency appears.
2 Rotate the volume control dial until the
desired station appears.
3 Press (ENTER) to receive the station.
The display returns to normal reception
mode.
With the card remote commander
Select the band, then press (LIST). Press M or m
repeatedly until the desired station appears, then
press (ENTER).
USB devices
Playback of USB devices
1 Connect the USB device to the USB
terminal.
Playback starts.
If a USB device is already connected, press
(SOURCE) repeatedly until “USB” appears, to
start playback.
Press (OFF) to stop playback.
Notes
• Before removing a USB device, be sure to stop
playback first. If you remove your USB device during
playback, data in the USB device may be damaged.
• Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
connection.
Display items
A ATRAC/WMA/MP3/AAC indication*
1
WMA/MP3/AAC indication*
2
B Clock
C Track/album/group number, Disc/artist/
album/group/track name, Elapsed playing
time, Text information
*1 When an ATRAC Audio Device is connected.
*2 When a Mass Storage Class Device is connected.
To change display items C, press (DSPL);
scroll display items C, press (SCRL) or set
“Auto Scroll on” (page 12).
continue to next page t
To Next Page
Loading...
