To Next PageTo Next Page
Need help?Do you have a question about the Sony CDX-GT24W and is the answer not in the manual?
General| MP3 playback | Yes |
|---|---|
| Audio formats supported | MP3, WMA |
| Tuner type | SSIR-EXA |
| AM band range | 530 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 30 |
| Impedance | 8 Ω |
| Product color | Black |
| Ready for iPod | No |
| Disc types supported | CD, CD-RW |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 52 W |
| Signal-to-Noise Ratio (SNR) | 120 dB |
| Power requirements | 12 V DC |
| Key illumination color | Red |
| Number of optical discs | 1 discs |
| Display type | LCD |
Weight and Dimensions| Weight | 1200 g |
|---|---|
| Dimensions (WxDxH) | 178 x 50 x 179 mm |
Technical specifications for CD playback functionality including signal-to-noise ratio and frequency response.
Technical specifications for FM, AM, and SW tuning ranges, intervals, sensitivity, and frequency response.
Tuning range, interval, and sensitivity details for the MW band.
Tuning range and sensitivity details for the SW bands.
Details on speaker output, impedance, and maximum power output.
General specifications including power requirements and tone control ranges.
Guidelines for connecting extension cables for repair and service operations.
Specific instructions for replacing key components like AUX jack, servo board, and connectors.
Diagrams and explanations detailing external connections for the unit.
Step-by-step guide for disassembling the sub panel assembly.
Procedure for disassembling the CD mechanism block.
Instructions for removing the main circuit board.
Instructions for removing the servo circuit board.
Disassembly steps for the chassis (T) sub assembly.
Disassembly of the roller arm assembly.
Disassembly steps for the chassis (OP) assembly.
Disassembly of the chucking arm sub assembly.
Procedure for disassembling the sled motor assembly.
Disassembly of the optical pick-up section.
Detailed steps for optical pick-up removal.
System block diagram for the main unit.
Block diagram for the display unit.
PCB layout for the main board.
Electrical schematic for the main board (part 1/3).
Electrical schematic for the main board (part 2/3).
Electrical schematic for the main board (part 3/3).
PCB layout for the key board.
Electrical schematic for the key board.
Diagrams showing IC pin functions and connections.
Detailed pin descriptions for main ICs.
Exploded view illustrating the main unit's components.
Exploded view illustrating the front panel components.
Exploded view illustrating the CD mechanism components.
List of electronic components for the key board.
List of electronic components for the main board.
List of parts required for physical installation and connections.
