Sony CDX-GT200 User Manual

Details FCC rules, potential interference, and user correction steps.

Warns against unauthorized modifications that could void operating authority.

Advises holding the OFF button if the ignition lacks an ACC position to prevent battery drain.

Explains how to reset the unit using the reset button for initial setup or after battery changes.

Provides step-by-step instructions for setting the 12-hour digital clock.

Identifies and explains the functions of buttons and features on the main unit.

Identifies and explains the functions of the remote commander's buttons.

Covers automatic (BTM) and manual station storage, and how to receive stored stations.

Explains adjustment of balance, fader, subwoofer, and EQ3 equalizer curves.

Details how to configure setup items like clock, beep, AUX, dimmer, and demo modes.

Provides instructions and warnings for replacing the remote control's battery.

Guides on how to replace a blown fuse and when to consult a dealer.

Addresses issues related to the unit not powering on or receiving power.

Guides on troubleshooting problems with the power antenna not extending.

Covers causes and solutions for lack of audio output or missing beep notifications.

Addresses disc loading, playback errors, file format issues, and skipping.

Explains common error codes like ERROR, FAILURE, NO ID3, and NO INFO.

Outlines the terms for labor, parts, and accessories covered under the warranty.

Explains the process for getting warranty service, including delivery and proof of purchase.

Lists what is NOT covered by the warranty and limitations on damages and implied warranties.