Need help?Do you have a question about the Sony CDX-GT490U and is the answer not in the manual?
General| CD Playback | Yes |
|---|---|
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | No |
| USB Port | Yes |
| Bluetooth | No |
| Display | LCD |
| Display Lines | 1 Line |
| Equalizer | Yes |
| AUX In | Yes |
| USB Direct Playback | Yes |
| Audio D/A Converter (DAC) | 24-bit |
| Product Colour | Black |
| Detachable Faceplate | Yes |
| Remote Control | Yes |
| Channels | 4 |
| RMS Power Output | 17 W |
| Tuner Bands | FM |
| Preset Stations | 18 FM |
| Power Output | 52 Watts |
Setting the Auto Off function or manually powering down the unit to prevent battery drain.
Details on the types of discs (CD-DA, MP3, WMA, AAC) that can be played.
Procedure for resetting the unit to factory settings after battery replacement or connection changes.
Steps to disable the automatic demonstration display.
Instructions for preparing the remote commander for use, including removing insulation film.
Guide to setting the 12-hour digital clock display on the unit.
Warning about the caution alarm sounding if the ignition is turned off without detaching the panel.
Important notes regarding handling, heat, moisture, and USB device detachment.
Instruction not to place anything on the inner surface of the front panel.
Detailed description and function of each button and connector on the main unit.
Explains SEEK +/- buttons for CD/USB track skipping and radio tuning.
Describes how to turn on/off power and change sources using the SOURCE/OFF button.
Explains using the control dial for volume adjustment and menu selection.
Information on inserting discs into the slot and using the eject button.
Details on connecting USB devices to the unit.
Instructions for using the button to detach the front panel.
Explains the BROWSE button for Quick-BrowZer and ZAP button for ZAPPIN mode.
Location of the receptor for the card remote commander.
Indicates the location of the RESET button, which is behind the front panel.
Describes using the MODE button for radio band selection and iPod play mode.
Function of the PTY button for selecting program types in RDS.
Location and function of the frequency select switch on the unit.
Details on using number buttons for track/album control and radio station storage.
Explains using DSPL for display items and SCRL for scrolling text.
Location and purpose of the AUX input jack for connecting audio devices.
How to use the OFF button to turn off the unit or stop the source.
How to turn on the unit or change the source using the SOURCE button.
Using the seek/skip buttons for radio, CD, and USB control.
Function of the DSPL button for changing display items.
How to adjust volume and attenuate sound using the remote.
Describes the function of the SEL button on the remote.
How to select radio bands or iPod play modes with the MODE button.
Using the up/down buttons for CD/USB control and setup.
How to use the SCRL button to scroll display items.
Using number buttons for receiving and storing radio stations.
Using the Quick-BrowZer mode to search for tracks by category.
Efficiently searching items in a category using jump mode in Quick-BrowZer.
Instructions on how to exit the Quick-BrowZer search mode.
Steps to cancel the jump mode during item search.
How to enter ZAPPIN mode to listen to track passages for searching.
Procedure to select a desired track while in ZAPPIN mode.
Tips on playback time selection and track/album skipping in ZAPPIN mode.
Instructions for storing and receiving radio stations using BTM and manual methods.
How to automatically search and tune into radio stations.
Explanation of RDS service sending inaudible digital information with radio signals.
Description of information displayed via RDS, such as band and program name.
Details on PTY (Program Types) and CT (Clock Time) RDS services.
List of program types that can be selected using the PTY function.
Instructions on how to enable the CT function to set the clock automatically.
Steps to search for radio stations broadcasting a specific program type using PTY.
Information on what data is displayed during CD playback.
How to set track or album repeat and shuffle play for CDs.
Information on compatible USB device types, formats, and support site.
Steps to connect and play music from a USB device.
Procedure for safely disconnecting a USB device from the unit.
Important notes on USB device usage, limitations, and potential issues.
Information on what data is displayed when a USB device is connected.
How to set repeat and shuffle play modes for USB devices.
Information on compatible iPod models and connection support.
Steps to connect and play music from an iPod.
Description of different play modes for iPod playback.
How to select various play modes like Album, Track, Podcast, Genre.
Instructions for skipping items within iPod content.
How to set repeat and shuffle play modes for iPod content.
Information on what data is displayed when an iPod is connected.
How to enable direct iPod operation from the unit.
How to cycle through different display information for the iPod.
Steps to exit direct iPod operation and return to normal mode.
Guide to adjusting EQ, Balance, Fader, Subwoofer, and AUX level.
Explanation of the EQ3 equalizer with various music types and custom settings.
How to adjust the sound balance between left and right speakers.
How to adjust the sound balance between front and rear speakers.
Adjusting the subwoofer volume.
Adjusting the volume level for connected auxiliary equipment.
Detailed steps for customizing EQ3 settings like LOW, MID, and HI.
Guide to adjusting various setup parameters like clock, beep, and display.
Procedure for adjusting the unit's clock.
Activating the CT function to automatically set the clock via RDS.
Enabling or disabling the unit's beep sound.
Activating the display for the AUX audio source.
Setting the unit to automatically shut off after a specified time.
Switching audio output between subwoofer and rear amplifier.
Turning off illumination automatically when inactive.
Activating or deactivating the demonstration display.
Adjusting the display brightness.
Enabling or disabling motion patterns and spectrum analyzer display.
Enabling or disabling automatic scrolling of long display items.
Configuring local seek mode for tuning into stronger signals.
Enabling monaural reception for improved poor FM reception.
Selecting the playback time for the ZAPPIN function.
Adjusting subwoofer cut-off frequency and phase.
Adjusting front/rear speaker cut-off frequency.
Reinforcing bass and treble for clear sound at low volumes.
Using BTM to store and prevent accidents while driving.
Steps to connect a portable audio device to the AUX input jack.
Procedure for adjusting volume levels between the unit and portable audio device.
General precautions for unit operation, sunlight, and moisture condensation.
Important notes regarding disc handling, cleaning, and compatibility.
List of disc types and conditions that are not playable by the unit.
Limitations and specifications for CD-R/CD-RW discs.
Diagram showing the playback order for MP3/WMA/AAC files and folders.
List of compatible iPod models and details on 'Made for iPod' and 'Works with iPhone' certifications.
Step-by-step guide to replacing the battery in the card remote commander.
Safety precautions and handling instructions for lithium batteries.
Instructions on how to replace the unit's fuse, including safety warnings.
Procedure for cleaning connectors between the unit and front panel to ensure proper function.
Steps to detach the protection collar surrounding the unit.
Detailed instructions on how to unseat and slide the unit out of its mounting.
Technical details for the FM and AM tuner sections, including tuning range and sensitivity.
Technical specifications for the CD player, including signal-to-noise ratio and frequency response.
Technical details for the USB player interface and maximum current.
Specifications for the power amplifier output and speaker impedance.
Overall specifications including audio outputs, inputs, tone controls, power requirements, and dimensions.
Common problems and solutions for power, sound, beeps, and memory issues.
Checking connections, fuses, and unit status when no power is supplied.
Addressing problems with the power antenna not extending.
Diagnosing issues causing no sound, like ATT function or fader settings.
Solutions for memory content being erased due to reset button or power loss.
Addressing noise when the ignition position is switched.
How to prevent the demonstration mode from starting automatically.
Resolving problems with the display disappearing or not appearing.
Diagnosing issues with the Auto Off function not operating correctly.
Resolving issues where the card remote commander is not functioning.
Solutions for stations not being received or sound being hampered by noise.
Addressing issues with preset tuning, including local seek mode and signal strength.
Resolving problems with automatic tuning, such as frequent stops or weak signals.
Fixing issues where FM stereo broadcasts are heard in monaural.
Resolving issues with the RDS PTY display showing dashes or incorrect information.
Solutions for discs not loading, playing, or MP3/WMA/AAC file playback problems.
Addressing issues where CD display items do not scroll.
Solutions for sound skipping issues, including installation angle and disc condition.
Resolving problems where unit operation buttons are unresponsive.
Solutions for not being able to play USB items, beep sounds, or intermittent sound.
Message indicating the unit is confirming a USB device connection.
Error messages related to dirty discs, blank discs, unplayable discs, or unrecognized USB devices.
Indicates an incorrect connection of speakers or amplifiers.
Message indicating that USB hubs are not supported by the unit.
Indicates that local seek mode is on during automatic tuning.
Message indicating no USB device is connected or it was disconnected.
Message indicating no music files are present on the disc or USB device.
Message indicating missing track, album, or artist name information.
Indicates a possible internal malfunction, requiring dealer consultation.
Message indicating the USB device is overloaded or unsupported.
Message indicating the unit is reading track and album information from the disc.
Indicates the unit or USB device cannot be operated due to a problem.
Message indicating the connected USB device is not supported.
Note about characters that cannot be displayed on the unit.
To Next Page
