16GB
Connection
*1 Not supplied
*2 Speaker impedance: 4 – 8 × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for a
wired remote control (not supplied).
*5 Note for the antenna (aerial) connecting (Argentine
models only):
If your car antenna (aerial) is an ISO (International
Organization for Standardization) type, use the
supplied adaptor to connect it.
*
2
Front speaker*
1
*
2
White
White/black striped
Gray
Black
Yel low
Red
Blue/white striped (MAX 0.4A)
from a wired remote control
(not supplied)*
4
For details, see “Making
connections” (page 17).
Gray/black striped
Green
Green/black striped
Purple
Purple/black striped
*
3
*
3
Subwoofer*
1
Power amplifier*
1
from a car antenna (aerial)*
5
See “Power connection diagram (Argentine models
only)” (page 18) for details.
Rear speaker
*1*2
For Argentine models
To Next Page
Loading...
