Sony CDX-GT282S - General Information and Controls; Location of Controls - CDX-GT130;GT230; Location of Controls - CDX-GT180;GT280;GT280 S;GT282 S

CDX-GT130/GT180/GT230/GT280/GT280S/GT282S
5
SECTION 2
GENERAL
This section is extracted
from instruction manual.
• LOCATION OF CONTROLS
CDX-GT130/GT230:
6
Location of controls and basic operations
Main unit
Card remote commander
RM-X151
(CDX-GT330/GT33W/GT230
only)
This section contains instructions on the location
of controls and basic operations.
For details, see the respective pages.
For optional device (CD changer, etc.,)
operation, see “CD changer (CDX-GT330/
GT33W only)” on page 11. The corresponding
buttons on the card remote commander control
the same functions as those on the unit.
" OFF button
To power off; stop the source.
# SEEK +/– buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (pre ss); find
a station manually (press and hold).
$ SOURCE button
To power on; change the source* (Radio/CD/
AUX).
% EQ3 (equalizer) button page 9
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
& Control dial/select button page 9
To adjust volume (rotate); select setup items
(press and rotate).
' Disc slot
Insert the disc (label side up), playback
starts.
( Display window
ALBM ARTIST TRACK SHUF ZAP
+
DM
LOUDDISCREGTPTAAF
AUX
1 2 3 4 5 6BTM
SOURCE
M
ODE
SEEK
SEEK
EQ3
DSPL
PUSH SELECT
PAUSEREP SHUF
OFF

R
T
R
B
R


R
E
R
I
R
H

RG
OFF
DSPL
SCRL
SEL SOURCE MODE
132
465
ATT
VOL
+
–
+
–

XB
RT

XE
RK
RL
X
RM
XG
XT
7
) AUX input jack page 10
To connect a portable audio device.
* ;(eject) button
To eject the disc.
+ DSPL (display)/SCRL (scroll) button
(CDX-GT330/GT33W/GT230) page 8
To change display items (press); scroll the
display item (press and hold).
DSPL (display) button (CDX-GT130)
page 8
To change display items.
, (front panel release) button page 5
- MODE button page 8
To select the radio band (FM/AM)*.
. BTM/CAT button (CDX-GT330/GT33W)
page 8
To start the BTM function (press and hold).
BTM button (CDX-GT130/GT230)
page 8
To start the BTM function (press and hold).
/ RESET button (located behind the front
panel) (CDX-GT330/GT33W only)
page 4
0 Number buttons
CD:
/: ALBUM –/+ (during MP3/WMA
playback) (CDX-GT330/GT33W/GT230)
To skip albums (press); skip albums
continuously (press and hold).
: REP page 8
: SHUF page 8
: PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
1 Receptor for the card remote
commander (CDX-GT330/GT33W/
GT230 only)
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4) (CDX-GT330/GT33W/GT230
only).
RK  ()/ () buttons
To control CD/radio, the same as 4&&,
–/+ on the unit.
Setup, sound setting, etc., can beoperated by
.
RL DSPL (display) button
To change display items.
RM VOL (volume) +/– button
To adjust volume.
X ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
XB SE
L (select) button
Th
e same as the select button on the unit.
XT . (+)/N (–) buttons
To control CD, the same as /
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
.N.
XE SCRL (scroll) button
To scroll the display item.
XG Number buttons
To receive stored stations (press); store
stations (press and hold).
* In the case of a CD changer, HD Radio tuner or SAT
tuner being connected; when 4063$& is pressed,
the connected device (“HD,” “XM” or “SR”) will
appear in the display, depending on which device is
connected. Furthermore, if .0%& is pressed, you
can switch the changer, HD Radio tuner band or SAT
tuner band (CDX-GT330/GT33W only).
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless 4063$& on the unit is pressed, or a disc is
inserted to activate the unit first.
CDX-GT180/GT280/GT280S/GT282S:
6
Location of controls and basic operations
Main unit
Card remote commander
RM-X151 (CDX-GT282S/
GT280S/GT280/GT28M only)
This section contains instructions on the location
of controls and basic operations.
For details, see the respective pages.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
" OFF button
To power off; stop the source.
# SEEK +/– buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (pre ss); find
a station manually (press and hold).
$ SOURCE button
To power on; change the source (Radio/CD/
AUX).
% EQ3 (equalizer) button page 9
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
& Control dial/select button page 9
To adjust volume (rotate); select setup items
(press and rotate).
' Disc slot
Insert the disc (label side up), playback
starts.
( Display window
ALBM PTY STTRACK SHUFLOUD
SET UP
GERCSIDTPTAAF
AUX
1 2 3 4 5 6BTM
SOURCE
MODE
SEEK
SEEK
EQ3
DSPL
PUSH SELECT
PAUSEREP SHUF
OFF

RTRBR

R
ERIRH

RG
OFF
DSPL
SCRL
SEL
SOURCE
MODE
132
465
ATT
VOL
+
–
+
–

XB
RT

XE
RK
RL
X
RM
XG
XT
7
) AUX input jack page 10
To connect a portable audio device.
* ;(eject) button
To eject the disc.
+ DSPL (display)/SCRL (scroll) button
(CDX-GT282S/GT280S/GT280/GT28M)
page 8
To change display items (press); scroll the
display item (press and hold).
DSPL (display) button (CDX-GT180)
page 8
To change display items.
, (front panel release) button page 5
- MODE button page 8
To select the radio band (FM/MW/SW).
. BTM button page 8
To start the BTM function (press and hold).
/ Frequency select switch (located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
0 Number buttons
CD:
/: ALBUM –/+ (during MP3/WMA
playback) (CDX-GT282S/GT280S/
GT280/GT28M)
To skip albums (press); skip albums
continuously (press and hold).
: REP page 8
: SHUF page 8
: PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
1 Receptor for the card remote
commander (CDX-GT282S/GT280S/
GT280/GT28M only)
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5) (CDX-GT282S/GT280S/GT280/
GT28M only).
RK  ()/ ()buttons
To control CD/radio, the same as 4&&,
–/+ on the unit.
Setup, sound setting, etc., can be operated by
.
RL DSPL (display) button
To change display items.
RM VOL (volume) +/– button
To adjust volume.
X ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
XB SEL (select) button
The same as the select button on the unit.
XT
. (+
)/
N (–)
buttons
To control CD, the same as /
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
.N.
XE SCRL (scroll) button
To scroll the display item.
XG Number buttons
To receive stored stations (press); store
stations (press and hold).
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless 4063$& on the unit is pressed, or a disc is
inserted to activate the unit first.