Sony CDX-GT610US - EQ7 Equalizer Customization; Time Alignment and Listening Position

CDX-GT61UMS/GT560UE/GT560UI/GT560US/GT564UI/GT610UG/GT610US/GT616UG
CDX-GT61UMS/GT560UE/GT560UI/GT560US/GT564UI/GT610UG/GT610US/GT616UG
1717
3-12. OPTICAL PICK-UP SECTION
3-13. OPTICAL PICK-UP
1
2 optical pick-up section
Note:
Be careful not to touch the lens and hologram
terminal when removing the optical pick-up section.
– bottom side view –
There is space at the end of the
leaf spring (OPS) to avoid
contact with the slide.
5 optical pick-up
4 lead screw assy
Prevent the end of the
leaf spring (OPS) from being
in contact with the OP slide base.
Prevent the end of the
leaf spring (OPS) from being
in contact with the OP slide base.
1 tapping screw
(P 1.4)
2 leaf spring (OPS)
3 rack
– bottom side view –
 Notes for Assembly
3-11. SLED MOTOR ASSY
3 sled motor assy
sled motor assy
1 spring
spring
stand
stand
turn table
2 three serration screws
(M2 u 3)
three serration screws
(M2 u 3)
bearing (F)
bearing (R)
Note 1:
Place the stand with care not to touch the turn table.
Note 2:
Never remove these parts since they were adjusted.
Note 3:
Take care to prevent the chassis from being bent
when tightening the three machine screws.
1RWHIRU$VVHPEO\
–ERWWRPVLGHYLHZ–
–ERWWRPVLGHYLHZ–
–ERWWRPVLGHYLHZ–