10
iPod
Playing back iPod
By connecting an iPod to the dock connector at
the rear of the unit, you can listen on your car
speakers, while controlling the iPod from the
unit.
Notes
• When an iPod is connected to the dock connector,
operation from the iPod cannot be performed.
• Before connecting the iPod to the dock connector,
turn down the volume of the unit.
Playing tracks
1 Connect the iPod to the dock
connector.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below.
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press (SOURCE) repeatedly until
“IPOD” appears.
2 Press (MODE) to select the play mode.
The mode changes as follows:
Resuming Mode t Album Mode t
Track Mode t Podcast Mode t Genre
Mode t Playlist Mode t Artist Mode
3 Adjust the volume.
Press (OFF) to stop playback.
Tips
• When the iPod is connected to the dock connector,
the mode changes to the Resuming mode. In
Resuming mode, pressing (3) (REP) or (4) (SHUF)
does not function. If you cancel the resuming mode
by pressing (MODE) or (1)/(2) (ALBUM –/+) now
function to change the play mode.
• When the ignition key is turned to the ACC position,
or the unit is on, the iPod will be recharged.
• If the iPod is disconnected during playback, “NO
IPOD” appears in the display of the unit.
Display items
A Source (iPod) indication
B Track/Album/Podcast/Artist/Playlist/Genre
number, Track/Artist/Album name, Elapsed
playing time, Clock
To change display items B, press (DSPL).
Note
Some letters stored in iPod may not be displayed
correctly.
>
.
M
E
N
U
To Next Page
Loading...
Need help?
General
