Do you have a question about the Sony CDX-GT650UI and is the answer not in the manual?
Output power | 52 W |
---|---|
Product color | Black |
Ready for iPod | Yes |
Signal-to-Noise Ratio (SNR) | 18 dB |
Audio formats supported | AAC, MP3, WMA |
Display type | LCD |
Information on the types of discs compatible with the unit.
Procedure to reset the unit to its default settings.
How to disable the demonstration display mode.
Instructions for adjusting the unit's clock time.
Steps to remove the detachable front panel from the unit.
Steps to reattach the front panel to the unit.
How to tune into and save radio stations.
Introduction to Radio Data System services.
Searching for radio stations by program type.
Using RDS data to automatically set the clock.
Steps to insert and play a CD.
Procedure to remove a CD from the unit.
Information shown on the display during CD playback.
Options for repeating tracks or shuffling playback order.
How to safely disconnect a USB storage device.
Instructions for playing audio files from a USB device.
Information shown on the display during USB playback.
Prerequisites and initial setup for the SensMe™ function.
Guide to installing necessary software on your computer.
How to navigate and select music channels and tracks.
Instructions for connecting and playing music from an iPod.
Using Quick-BrowZer to find tracks by name.
Efficiently searching items using Jump mode.
Adjusting display and button colors using presets or custom settings.
Registering a personalized color for the display and buttons.
Setting different colors for day and night display modes.
Synchronizing display/button colors with SensMe™ channels.
Changing colors based on music synchronization.
Enabling a clear white menu display.
Activating a white effect when the unit starts up.
Adjusting various audio characteristics and settings.
Overview of enhanced sound processing features.
Choosing from seven equalizer presets for sound quality.
Procedure for adjusting the unit's clock.
Activating the Clock Time feature via RDS.
Enabling or disabling the unit's beep sound.
Enabling the AUX audio source input.
Setting the automatic power-off timer.
Turning the demonstration mode on or off.
Adjusting display brightness based on illumination.
Adjusting the contrast level of the display.
Selecting a preset color for display and buttons.
Setting custom colors for display and buttons.
Changing colors based on SensMe™ channels.
Selecting color synchronization with sound.
Enabling a clear white menu display.
Activating a white effect when the unit starts up.
Configuring motion display patterns and spectrum analyzer.
Scrolling long text items automatically.
Tuning only to stations with stronger signals.
Improving poor FM reception by selecting monaural mode.
Setting playback time for the ZAPPIN function.
Enabling or disabling the beep sound between ZAPPIN passages.
Selecting subwoofer cut-off frequency.
Selecting the low pass filter slope.
Selecting the subwoofer phase mode.
Selecting front/rear speaker cut-off frequency.
Selecting the high pass filter slope.
Enhancing bass and treble at low volume levels.
Connecting external audio devices via the AUX input.
Important safety and operational precautions.
Handling advice for moisture buildup inside the unit.
Tips for preserving optimal audio performance.
Guidelines for using various types of discs.
Types of discs that cannot be played by this unit.
Specific considerations for CD-R and CD-RW discs.
Understanding the playback sequence for audio file types.
Information on compatible iPod models and features.
Steps to replace the battery in the card remote commander.
How to clean electrical connectors for proper unit function.
Guidance on replacing the unit's fuse.
Common issues and their solutions.
Troubleshooting when the demonstration mode activates unexpectedly.
Solutions for display problems like disappearance or absence.
Advised to consult the troubleshooting section first.
Suggestion to reset the unit to resolve issues.
Contact information for Sony customer support in the USA.
Important safety warnings and guidelines for installation.
Specific notes regarding the yellow power supply lead connection.
List of parts included for installation and connections.
Illustrates a typical connection setup for the unit.
Visual guide showing how to connect various components.
Terms and conditions that void the warranty.
Warranty limitations for commercial or rental use.
Items and services not covered by the warranty.
Requirement for providing proof of original purchase.
Warranty coverage for labor services.
Warranty coverage for replacement parts.
How to obtain warranty service.
Liability limits for incidental or consequential damages.
Limitations on the duration of implied warranties.