Sony CDX-T67 - Main Board; Escutcheon (S), Slide Variable Resistor (Elevator Height Sensor) (RV301)

CDX-T67
8
1 main flexible board
(CN101)
2 Remove three solders
of the slide variable resistor (RV301).
2 Remove two solders
of the elevator motor
lead wires (M104).
3 three screws (FP)
4 main board
2-6. MAIN BOARD
2-7. ESCUTCHEON (S), SLIDE VARIABLE RESISTOR (ELEVATOR HEIGHT SENSOR) (RV301)
4 slide variable resistor
(elevator height sensor)
(RV301)
slide variable resistor
(elevator height sensor
)
(RV301)
2 claw
1 screw (FP)
3 escutcheon (S)
2 three claws
2 three claws