Sony CFD-E90 User Manual

6
CFD-E90
SECTION 2
GENERAL
This section is extracted from
instruction manual.
4
Connect the supplied AC power cord.
1 Press ZPUSH OPEN/CLOSE down
to open the CD compartment and
place the CD on the CD
compartment.
2 Close the lid of the CD compartment.
3 Press u.
The player turns on (direct power-on)
and plays all the tracks once.
Basic Operations
3
Playing a CD
Display
With the label side up
1, 2
Playing timeTrack number
Basic Operations
5
Use these buttons for additional operations
POWER
x
u
Jog dial
VOLUME +, —
ZPUSH
OPEN/CLOSE
To Do this
adjust the volume Press VOLUME +*, — (VOL +, —
on the remote).
stop playback Press x.
pause playback Press u*.
Press the button again to resume
play after pause.
go to the next track Turn the jog dial clockwise.
(On the remote, press >.)
go back to the previous track Turn the jog dial counterclockwise.
(On the remote, press ..)
remove the CD Press ZPUSH OPEN/CLOSE.
turn on/off the player Press POWER.
* The button has a tactile dot.
6
Listening to the radio
Connect the supplied AC power cord.
1 Press RADIO¥BAND¥AUTO
PRESET until the band you want
appears in the display (direct power-
on).
2 Hold down TUNE + or TUNE — until
the frequency digits begin to change
in the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
If you can’t tune in a station, press
the button repeatedly to change the
frequency step by step.
Display
Indicates an FM stereo
broadcast
12
Basic Operations
7
Use these buttons for additional operations
To Press
adjust the volume VOLUME +*, —
(VOL +, — on the remote)
turn on/off the radio POWER
* VOLUME + has a tactile dot.
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for
AM.
for FM for AM
Tip
If the FM broadcast is
noisy, press MODE until
Mono appears in the
display and the radio will
play in monaural.
POWER
VOLUME +, —
MODE

Sony CFD-E90 Specifications

General

Brand	Sony
Model	CFD-E90
Category	CD Player
Language	English