16
Playing a tape
The system can play three types of tapes: Type I
(normal), Type II (CrO2) and Type IV (metal).
The system automatically detects the tape type so
there is no need to specify it.
To turn on the system, press ?/1.
Z
bB x
mM
Xz
Z
ux
+
–
.
>
m
M
2
14
TAPE X TAPE x
TAPE m/MVOLUME
DOLBY NR
3
Recording from the radio
(continued)
8 Press TAPE X.
Recording starts.
To stop recording
Press TAPE x.
Tips
• To record from a non-preset station, press
TUNING MODE repeatedly in step 3 until
“AUTO” and “PRESET” disappear, then press
TUNING +/– repeatedly to tune in the desired
station.
• To record with the Dolby NR system on, press
DOLBY NR on the remote before step 8. “;”
appears.
• To start recording on the side facing away from
you, after doing step 6, press TAPE nN until
“ ” changes to “ .”
• If you hear static while you are recording an AM
radio program, adjust the AM antenna to improve
the reception.
?/1
(Power)
To Next Page
Loading...
