CMT-CP300
Canadian Model
AEP Model
UK Model
E Model
SERVICE MANUAL
MICRO HI-FI COMPONENT SYSTEM
Sony Corporation
Audio Entertainment Group
General Engineering Dept.
9-873-888-11
2001D1600-1
© 2001.4
• CMT-CP300 are composed of following models.
As for the service manual, it is issued for each component
model, then, please refer to them.
SPECIFICATIONS
General
Power requirements
Canadian, Mexican model: 120 V AC, 60 Hz
European model: 230 V AC, 50/60 Hz
Other models:
110 - 120 V or 220 - 240 V AC, 50/60 Hz
Adjustable with voltage selector
Power consumption
European model: 70 W
0.5 W (at the power saving mode)
Other models: 70 W
Dimensions (w/h/d) Approx. 225 × 273 × 385 mm incl.
projecting parts and controls
Mass Approx. 7.3 kg
Supplied accessories Remote commander (1)
AM loop antenna (1)
FM wire antenna (1)
Batteries (2)
Design and specifications are subject to change without notice.
Ver 1.0 2001. 04
COMPONENT MODEL NAME
COMPACT DISK DECK
RECEIVER SYSTEM
SPEAKER SYSTEM
PARTS LIST
Part No. Description Remark
ACCESSORIES & PACKING MATERIALS
********************************
1-476-705-11 REMOTE COMMANDER (RM-SCP300)
1-501-374-11 ANTENNA, LOOP (AM)
1-501-659-61 ANTENNA (FM) (CND,EA,MX,SP)
0 1-569-008-21 ADAPTOR, CONVERSION 2P (EA,SP)
1-754-060-11 ANTENNA (FM) (AEP,UK)
4-233-757-11 MANUAL, INSTRUCTION (ENGLISH) (CND,AEP,UK,EA,SP)
4-233-757-21 MANUAL, INSTRUCTION (FRENCH,SPANISH) (AEP,SP)
4-233-757-31 MANUAL, INSTRUCTION (FRENCH) (CND,EA)
4-233-757-41 MANUAL, INSTRUCTION (SPANISH) (MX)
4-233-757-51 MANUAL, INSTRUCTION (GERMAN,DUTCH,ITALIAN) (AEP)
4-233-757-61 MANUAL, INSTRUCTION (SWEDISH,POLISH) (AEP)
4-233-757-71 MANUAL, INSTRUCTION (ARABIC) (EA)
4-233-757-81 MANUAL, INSTRUCTION (CHINESE) (SP)
4-233-758-11 MANUAL, INSTRUCTION (DANISH,FINNISH) (AEP)
4-233-758-21 MANUAL, INSTRUCTION (PORTUGUESE) (AEP)
4-235-505-01 COVER BATTERY (FOR RM-SCP300)
• Abbreviation
CND : Canadian model.
EA : Saudi Arabia model.
MX : Mexican model.
SP : Singapore model.
CMT-CP300
HCD-CP300
SS-CCP300
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
To Next Page
Need help?
General
