To Next Page
S
steve97Sep 12, 2025
How to fix a tape that does not erase completely on my Sony CMT-CP505MD Stereo System?
- DdcoleSep 12, 2025
If the tape does not erase completely on your Sony Stereo System, demagnetize the record/playback heads.
How to fix a tape that does not erase completely on my Sony CMT-CP505MD Stereo System?
If the tape does not erase completely on your Sony Stereo System, demagnetize the record/playback heads.
How to fix a Sony Stereo System remote that is not working?
If the remote for your Sony Stereo System isn't working, try these steps: * Ensure there are no obstacles blocking the path between the remote and the system. * Move closer to the system. * Point the remote directly at the system's sensor. * Replace the remote's batteries with new ones (R6/size AA).
How to eliminate hum or noise from my Sony CMT-CP505MD Stereo System?
If your Sony Stereo System is emitting a severe hum or noise, try the following: * Move the system away from potential noise sources. * Connect the system to a different power outlet. * Install a commercially available noise filter to the power line.
How to fix wow, flutter, or sound dropouts on my Sony CMT-CP505MD Stereo System?
If there is excessive wow or flutter, or the sound drops out on your Sony Stereo System, clean the capstans in the tape deck using a cleaning cassette.
What to do if the tape does not record or play on my Sony CMT-CP505MD Stereo System?
If your Sony Stereo System tape does not record or play, or there is a decrease in sound level, clean the heads or demagnetize them.
How to receive stereo FM programs on my Sony CMT-CP505MD Stereo System?
To receive a stereo FM program in stereo on your Sony Stereo System, press FM MODE until “STEREO” appears in the display.
What to do if MD play does not start on my Sony Stereo System?
If play does not start on your Sony Stereo System, replace the MD. Insert the MD and leave the system turned on for a few hours until the moisture evaporates. Press MD NX (or N on the remote) to start play, or press GROUP ON/OFF until GROUP indicator turns off to cancel the Group Function.
What to do if the sound skips when playing an MD on my Sony Stereo System?
If the sound skips when playing an MD on your Sony Stereo System, replace the MD. Try moving the system to a place without vibration, or move the speakers away from the system. Insert the disc and wait for 10 to 20 minutes with the system turned on.
How to start playing from the first track on my Sony Stereo System?
If your Sony Stereo System is not playing from the first track, press the PLAY MODE button repeatedly until both “PGM” and “SHUF” disappear from the display. This will return the system to normal play mode.
How to fix a Sony CMT-CP505MD Stereo System disc tray that does not close?
If your Sony Stereo System's disc tray won't close, make sure the disc is correctly placed in the center of the tray. Always close the tray by pressing the CD Z button; manually pressing it closed may cause issues.
General| Type | Mini Hi-Fi System |
|---|---|
| CD Player | Yes |
| MD Player | Yes |
| Tuner | FM/AM |
| Speakers | 2-way bass reflex speakers |
| Remote Control | Yes |
| Functions | CD, MD, Tuner |
| Inputs | Audio input |
| Outputs | Headphone output |
Guide to operating the Micro Hi-Fi Component System.
Instructions to prevent fire, shock hazard, and damage.
Information regarding the Class 1 Laser Product classification.
Reference page for main unit buttons and their functions.
List of remote control buttons and their corresponding operations.
Step-by-step guide to connect speakers and antennas.
Instructions for installing batteries in the remote control.
Guide to setting the system's clock.
How to load a CD and select playback modes.
Instructions for creating a custom playback sequence.
How to add titles to CDs for easy identification.
Steps to insert an MD and select playback modes.
How to create a custom playback order for MD tracks.
Overview of MD recording features and source considerations.
Using the Group Function to organize MD tracks.
Procedures for creating and adding tracks to MD groups.
Recording entire CDs or selected tracks to MD.
Recording from a tape to an MD.
Recording audio from before the record button was pressed.
Tips for labelling tracks recorded in MDLP mode.
Automatically marking tracks based on input signal levels.
Automatically creating 3-second gaps between recorded tracks.
Explanation of LP2 and LP4 long-time recording modes.
Information on issues and limitations with high-speed recording.
Conditions and checks required before editing an MD.
Procedures for deleting disc, track, and group titles.
Registering tracks into a newly created group.
Removing tracks from groups or releasing all group registrations.
Deleting individual tracks from an MD.
Deleting all content, including titles, from an MD.
Changing the order of tracks on an MD.
Splitting a single track into two tracks.
Merging two tracks into a single track.
Reverting the last editing operation performed on the MD.
Adjusting the recording level of existing tracks.
Applying fade-in or fade-out effects to recorded tracks.
Storing and recalling FM/AM radio stations.
Selecting and listening to stored radio stations.
Assigning names to preset radio stations.
Instructions for inserting and playing audio tapes.
Recording entire CDs to tape automatically.
Recording entire MDs to tape automatically.
Recording audio from various sources onto tape manually.
Setting the system to turn off automatically after a set time.
Scheduling radio programs for automatic recording.
Reducing power consumption by turning off the clock display.
Viewing track and disc information during playback or in stop mode.
Displaying information for tuned radio stations.
Connecting external digital and analog audio components.
Methods for playing and recording audio from external sources.
Common issues and solutions for system operation.
Solutions for problems related to MD and tape playback/recording.
Addressing issues with optional components and radio reception.
Understanding error codes for system malfunctions.
Explanations for messages related to MD and general operations.
Explanations for various system messages for tape and CD functions.
Guidelines for safe operation and system care.
Proper methods for cleaning and maintaining CDs and tapes.
Information on track count, time limits, and track marking restrictions.
Details on power output, inputs, and outputs for the main unit.
Technical specifications for MD, tape, tuner, and general system components.
