Sony CMT-U1BT - Listening to the Radio

13
GB
Basic Operations
CMT-U1BT.GB.2-683-494-61(1)
Listening to the radio
1 Select “FM” or “AM.”
Press TUNER/BAND

repeatedly.
2 Select the tuning mode.
Press TUNING MODE

repeatedly until
“AUTO” appears.
3 Tune in the desired station.
Press +/– (or TUNE +/– on the unit)

. Scanning stops automatically when a
station is tuned in, and then “TUNED” and
“STEREO” (for stereo programs) appear.
4 Adjust the volume.
Press VOLUME +/–

.
To stop automatic scanning
Press 

.
To tune in a station with a weak signal
If “TUNED” does not appear and the scanning
does not stop, press TUNING MODE

repeatedly until “AUTO” and “PRESET”
disappear, and then press +/– (or TUNE +/– on
the unit)

repeatedly to tune in the desired
station.
To reduce static noise on a weak FM stereo
station
Press FM MODE

repeatedly until “MONO”
appears to turn o stereo reception.