Need help?Do you have a question about the Sony CPD-520GS and is the answer not in the manual?
Operating Environment| operating temperature | 50°F-104°F (10°C-40°C) |
|---|---|
| operating humidity | 10%-80% (Non-Condensing) |
| power requirements | 100-240V AC; 50-60Hz |
Display Specifications| maximum resolution | 1600 x 1200 @ 75Hz |
|---|---|
| viewable image size | 19.8" |
| aperture grille pitch | 0.25-0.27mm (variable) |
Power Management| operation power consumption | 160 watts (maximum) |
|---|---|
| suspend power consumption | 15 watts (maximum) |
| active off power consumption | 5 watts (maximum) |
Weight and Dimensions| weight | 68.3 lbs |
|---|---|
| dimensions | 19.6" x 19.9" x 18.7" |
Critical safety information regarding electrical hazards and exposure.
Compliance statement for radio frequency emissions.
Essential safety and installation guidelines.
Procedures for setting up the monitor correctly.
Guidelines for cleaning and caring for the display.
Instructions for moving the monitor safely.
How to adjust the monitor's viewing angle.
Important safety advice regarding electrical connections.
Identifies buttons and indicators on the monitor's front.
Identifies input/output ports on the monitor's back.
Instructions for connecting IBM PC/AT compatible computers.
Instructions for connecting Macintosh computers.
Information on the included Macintosh adapter.
Alternative connection method using BNC cables.
Automatically centers and sizes the image.
How to select the OSD language.
Switching between HD15 and 5BNC inputs.
Setting signal detection to AUTO or MANUAL.
Controls for image luminosity and contrast.
Overview of the OSD system and its menus.
Adjusting the image's horizontal and vertical position.
Adjusting the image's horizontal and vertical dimensions.
Adjusting image rotation, pincushion, and trapezoid effects.
Enlarging or reducing the image.
Adjusting the color temperature of the display.
Advanced color temperature adjustments.
Adjusting convergence and moire patterns.
Manually demagnetizing the monitor screen.
Adjusting the location of on-screen menus.
Configuring the delay before entering power saving mode.
Disabling monitor buttons to prevent accidental changes.
Selecting the preferred language for menus.
Restoring factory default settings for parameters.
Monitor's supported display modes.
Technical timing specifications and OS-specific notes.
How to set display resolution and color depth.
Details on energy conservation modes.
Accessing model and serial number data.
Technical description of screen artifacts.
Information on VESA DDC standards.
Meanings of on-screen error messages.
Steps to diagnose and resolve common issues.
Monitor's built-in diagnostic tool.
Detailed technical data of the monitor.
Introduction to the TCO'95 certification.
Explains the benefits of environmentally labelled products.
Details what the TCO'95 standard covers.
Details on flame retardants, lead, cadmium, mercury, and CFCs.
To Next Page
