Sony Cyber-shot DSC-L1 - Attaching a Tripod

12
DSC-L1 2-186-455-11(1) [OpenType FONT]
Attaching a tripod
Securing the camera to a tripod lets you
shoot clear pictures with little or no
shaking. When attaching a tripod to the
camera, first attach the tripod adaptor.
• You cannot attach the tripod directly to
the camera.
Attach the tripod adaptor
1 Insert the protrusion on the tripod
adaptor with the tripod adapor
attachment groove on the camera.
2
3
4
1
 Tripod adaptor attachment
groove
 Screw groove
 Locking screw
 Protrusion
2 Make sure to match the locking screw
with the screw groove on the camera,
and then turn the locking screw to
secure the tripod adaptor to the camera.
6
5
 Locking screw
 Tripod screw hole
Attach the tripod here.
• See the operating instructions supplied with the
tripod for the method of attaching the tripod.
• Use a tripod with a screw length of less than
5.5 mm (7/32 inch). You will be unable to
firmly secure the tripod adaptor to tripods
having longer screws, and may damage the
camera.
• Be careful so that the tip of the locking screw
does not scratch the camera.