Cyber-shot User Guide
PrintSearch
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Changing settings > Setup menu > Power Saving Start Time
Power Saving Start Time
Sets the length of time until the camera turns off automatically.
If you do not operate the camera for a certain period of time while the power is on using the battery pack,
the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function).
1. MENU
2 [Power Saving Start Time] desired mode
30 Min
Turns off the camera after the time you set.
5 Min
1 Min
20 Sec
10 Sec
Notes
The camera does not enter “Auto power-off function” under conditions such as during a slideshow,
when recording movies or when the camera is connected to a computer.
When [LCD Quality] is set to [Standard], the [Power Saving Start Time] setting cannot be changed.
Back to top
Copyright 2012 Sony Corporation
To Next Page
Loading...
