To remove the battery pack
Battery eject lever Slide the battery eject lever. Bc sure not
to drop the battery pack.
Notes on the multi-connector cover
To open the multi-cenneclor cever, first open the baflery/memory card cover.
Then, pull the netch on the left side of the multi-connector cover out with the GB
c,osethemu>cennectorco.er theb.ttery,memory
l'ingernaih
card cover.
Multi-connector cover
Checking the remaining battery charge
A remaining charge indicator appears on th,,."LCD screen.
High _ _ _ _ L.ow
)
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct under certain circumstances.
• When [Power Save] is set to [Standard] or [Stamina], if you do not operate the
camera for a certain period of time while the power is on, the LCD screen becomes
clark, then the camera turns off automatically (Auto power-off function).
• To keep clean battery pack terminal and prevent short-circuiting, place the battery
pack in a plastic bag, etc. when carrying and storing to isolate it from other metal
objects, etc.
GB
19
To Next Page
Loading...
