To Add a Wi-Fi Network Manually
1
From your Homescreen, tap .
2
Find and tap Settings > Wi-Fi.
3
Tap > Add network.
4
Enter the Network name (SSID) information.
5
To select a security type, tap the Security field.
6
If required, enter a password.
7
To edit advanced options, such as proxy and IP settings, tap Advanced options
and then edit the options as desired.
8
Tap Save.
Contact your Wi-Fi network administrator to get the network SSID and password.
Increasing Wi-Fi Signal Strength
There are a number of things you can do to improve Wi-Fi reception:
•
Move your device closer to the Wi-Fi access point.
•
Move the Wi-Fi access point away from any potential obstructions or interference.
•
Don’t cover the Wi-Fi antenna area of your device (the highlighted area in the illustration).
Wi-Fi Settings
When you are connected to a Wi-Fi network or when there are Wi-Fi networks available
in your vicinity, you can view the status of these networks. You can also enable your
device to notify you whenever an open Wi-Fi network is detected.
To Enable Wi-Fi Network Notifications
1
Turn on Wi-Fi if it isn’t on already.
2
From your Homescreen, tap
.
3
Find and tap Settings > Wi-Fi.
4
Tap
> Advanced.
5
Drag the slider beside Network notification to the right.
To View Detailed Information About a Connected Wi-Fi Network
1
From the Homescreen, tap
.
2
Find and tap Settings > Wi-Fi.
3
Tap the Wi-Fi network you are currently connected to. Detailed network
information is displayed.
49
This is an internet version of this publication. © Print only for private use.
To Next Page
Loading...
