5
Getting Started
1 Connect the flat cord to the SYSTEM
CONTROL connectors until it clicks.
To disconnect
2 Connect the front speakers.
Connect the speaker cords to the FRONT
SPEAKER terminals as shown below.
Keep the speaker cords away from the aerials
to prevent noise.
Insert only the stripped portion.
+
–
R
L
+
3 Connect the FM/AM aerials.
Set up the AM loop aerial, then connect it.
Jack type A
AM
FM 75 Ω
COAXIAL
Red/
Solid (3)
Black/Stripe (#)
AM loop aerial
Extend the FM lead
aerial horizontally.
Jack type B
FM 75Ω
AM
AM loop aerial
Extend the FM lead
aerial horizontally.
Note
Set up the AM loop aerial as far as possible from the
main unit.
continued
To Next Page
Loading...
