68
Connecting external
aerials
Connect the external aerial to improve reception.
FM aerial
Connect an commercially available FM outdoor
aerial, or you can use a TV aerial instead.
Jack type A
IEC standard socket connector (not supplied)
AM
FM75
COAXIAL
Jack type B
AM
FM75
75-ohm coaxial cable (not supplied)
AM aerial
Connect a 6- to 15- meter insulated wire to the
AM aerial terminal. Leave the supplied AM loop
aerial connected.
Jack type A
Insulated wire (not supplied)
Jack type B
Insulated wire (not supplied)
Important
If you connect an outdoor aerial, connect a ground
wire to the U terminal. To prevent a gas
explosion, do not connect the ground wire to a gas
pipe.
Note
Set up the AM loop aerial as far as possible from the
main unit.
To Next Page
Loading...
