11-GB
Access lamp
Inserting a Memory Stick
“Memory Stick” is a trademark of Sony Corporation.
3
1 Open the Memory Stick cover.
Slide it in the direction of the arrow mark on the cover.
2 Insert the Memory Stick.
Insert it with the v mark pointing inward.
3 Close the Memory Stick cover.
To remove the Memory
Stick
Open the Memory Stick cover, then
press the Memory Stick eject button.
PNote
When the access lamp lights up, be
sure not to remove the Memory Stick
or turn off the power.
LOCK
Connector
LOCK
switch
Label space
Preparation
PNote on Memory Stick
You cannot record on a Memory Stick
if the LOCK switch is set to LOCK
position.
To Next Page
Loading...
Need help?
General
