11
Getting started
Charging the battery pack
, Open the battery/“Memory
Stick” cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when
charging the battery pack (page 15).
• Your camera operates only with the
“InfoLITHIUM” NP-FM50 battery pack (M
series) (supplied) (page 115).
, Install the battery pack, then
close the battery/“Memory
Stick” cover.
Insert the battery pack with the b mark
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
• The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment up.
, Open the jack cover and
connect the AC-L10A/L10B AC
power adaptor (supplied) to the
DC IN jack of your camera.
Connect the plug with the v mark facing
up.
• Do not short the DC plug of the AC power
adaptor with a metallic object, as this may
cause malfunction.
1
2
Battery eject lever
b mark
3
DC plug
AC power adaptor
Jack cover
To Next Page
Loading...
