2-8
DSC-N1_L2
2. DISASSEMBLY
2. DISASSEMBLY
Meeting the part A with the part a, B with b, and C with c respectively, mount a new barrier block assembly on the lens (fit it completely,
avoiding loose engagement or floating).
2-3-3. INSTALL NEW BARRIER BLOCK ASSEMBLY
Put the battery in the camera, and turn on the power (press twice to retract the lens-barrel).
Note: Check that the diaphragm of the barrier block assembly is not opened slightly or half-closed.
A
a
b
c
B
C
To Next Page
Loading...
