59
Using your computer
• Set the switch on the supplied cable for
multi-use terminal to “CAMERA”.
• With Windows XP, the AutoPlay wizard
appears on the desktop.
“USB Mode Mass Storage” appears on the
screen of the camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* During communication, the access indicators
turn red. Do not operate the computer until the
indicators turn white.
• If “USB Mode Mass Storage” does not appear,
set [USB Connect] to [Mass Storage] (page 53).
• For Windows 98/98SE/2000/Me, follow the
procedure explained in “Stage 4-B: Copying
images to a Computer” on page 61.
• For Windows XP, when the wizard screen does
not appear automatically, follow the procedure
explained in “Stage 4-B: Copying images to a
Computer” on page 61.
This section describes an example of
copying images to a “My Documents”
folder.
Stage 3: Connecting the camera
and your computer
Cable for multi-
use terminal
(supplied)
1 To a USB connector
2 To the multi connector
CAMERA
DISP SEL
TV
Stage 4-A: Copying images to a
computer
USB Mode
MENU
Switch on
Mass Storage
Memory Stick
Access
indicators*
To Next Page
Loading...
