71
Customizing the settings
Settings For details on the operation 1 page 60
Sets for achieving appropriate focus when attaching a conversion lens (not supplied). Attach
the adaptor ring (not supplied), then attach a conversion lens.
• When not set to [Off], the flash is set to (Flash forced off).
• Check the shooting image on the LCD screen due to covering in the finder window.
• The available zoom area is limited.
• The available focusing area is limited.
• For details, see the operating instructions supplied with your conversion lens.
Conversion Lens
Tele ( )
Attaches a tele conversion lens.
Wide ( )
Attaches a wide conversion lens.
Off
Does not attach a lens.
To Next Page
Loading...
