To Next PageTo Next PageWhy won't my Sony Camcorder turn on?
Your Sony Camcorder might not be powering on due to several reasons: there might be no battery pack loaded, the battery pack may have reached the end of its usable life, or the AC power adapter might not be connected or turned on. Try loading a battery pack, replacing it with a fully charged one, or connecting the AC power adapter.
What to do if the tape transport does not operate when I press VTR button on my Sony Camcorder?
If the tape transport does not operate when you press either VTR button on your Sony Camcorder, it could be due to several reasons. The POWER switch of the unit might be turned off, the camcorder may have reached the end of the tape, the cassette might be set record-inhibited, or an incorrect type of DVCAM or DV cassette might be loaded. Try turning the POWER switch on, rewinding the tape or loading a new cassette, loading a new cassette or releasing the record-inhibit, or loading a correct type of DV or DVCAM cassette.
What to do if the tape transport doesn't operate when pressing any button on my Sony Camcorder?
If the tape transport does not operate when you press any tape transport button on your Sony Camcorder, it may be because the camcorder has reached the end of the tape, or the cassette holder is not solidly closed after the cassette is inserted. Try rewinding the tape or loading a new cassette, or pressing on the “PUSH” indication to close the holder solidly.
What to do if the power supply cuts while operating my Sony DSR-390L, DSR-390PL Camcorder?
If the power supply cuts while you are operating your Sony Camcorder, it is likely that the battery pack is exhausted. Replace the battery pack with a fully charged one.
Why can't I eject the cassette and the playback picture quality is poor on my Sony Camcorder?
There could be a few reasons why you cannot eject the cassette and the playback picture quality is poor on your Sony Camcorder. The battery pack might be exhausted, the POWER switch might be turned off, or the cassette holder might not be solidly closed after the cassette is inserted, and the video heads may be dirty. Try replacing the battery pack with a fully charged one, turning the POWER switch on, and pressing on the “PUSH” indication to close the holder solidly and then press the EJECT button. You may also need to clean the video heads using a DVM- 12CLD Cleaning Cassette.
Why does the battery on my Sony Camcorder go dead so quickly?
If the battery on your Sony Camcorder is draining very quickly, it could be because the operating temperature is very low, or the battery pack is inadequately charged. Consider using a BP-IL75 or BP-M100, or recharging the battery pack.
Why is the recorded sound distorted on my Sony Camcorder?
If the recorded sound is distorted on your Sony Camcorder, the audio level may be too high. Adjust the setting of the AUDIO LEVEL (CH-1/CH-2) knobs, and record again.
Why does the recorded sound have a high noise level on my Sony Camcorder?
If the recorded sound has a high noise level on your Sony Camcorder, the audio level may be too low. Adjust the setting of the AUDIO LEVEL (CH-1/CH-2) knobs, and record again.
How to fix audio recording not possible on Sony Camcorder?
If audio recording is not possible on your Sony Camcorder, it could be because the AUDIO LEVEL (CH-1/CH-2) knobs are set to the minimum level, or the AUDIO LEVEL knob on the front is set to the minimum level. Adjust the setting of the AUDIO LEVEL (CH-1/CH-2) knobs, or adjust the setting of the AUDIO LEVEL knob.
Why can't I hear the playback sound and all controls are disabled except EJECT on my Sony DSR-390L, DSR-390PL?
If you cannot hear the playback sound and all controls except the EJECT button are disabled on your Sony Camcorder, there may be condensation on the head drum. Remove the cassette, power off the camcorder, and wait until the condensation has evaporated.
General| Recording Format | DVCAM |
|---|---|
| Playback Format | DVCAM |
| Recording Media | DVCAM cassette |
| Recording Time | Up to 184 minutes (with DVCAM-184 cassette) |
| Aperture | Depends on lens |
| Viewfinder | 1.5-inch |
| Audio Recording | 48 kHz/16-bit |
| Input/Output | Composite, S-Video |
Details the different models of the camcorder and their included components.
Describes the general features and capabilities of the digital camcorder.
Highlights common camera functions like image processing and auto settings.
Details the capabilities of the camcorder's internal VCR, including recording format.
Instructions on how to access and use the digital operation manuals on the supplied CD-ROM.
Identifies and explains the function of various buttons and connectors on the camcorder.
Procedure for installing and replacing the internal lithium battery for data retention.
Step-by-step guide on how to attach and detach lenses to the camcorder.
Instructions for attaching, removing, and adjusting the electronic viewfinder.
Details on installing the optional DXF-51/51CE (5-inch) electronic viewfinder.
Guide for mounting the camcorder onto a tripod using an adaptor.
Instructions for attaching and connecting optional microphones.
Guidance on connecting and using video lights with the camcorder.
Procedure for attaching the supplied shoulder strap to the camcorder.
Information on connecting external audio systems and wireless microphones.
Instructions for connecting an intercom adaptor for communication.
Details on using the optional LC-DS500 carrying case.
Details on using the optional LC-DS300SFT soft carrying case.
Describes various methods for connecting the camcorder to other equipment.
Guide for synchronizing multiple camcorders using external signals.
Instructions for connecting external VCRs via VTR/CCU or DV OUT connectors.
Details on connecting digital VCRs for cut editing and dubbing via i.LINK.
Guidance on connecting a camera control unit (CCU) for remote operation.
Information on the available power sources for the camcorder.
Details on using specific battery packs and their operating times.
Instructions for powering the camcorder using AC adaptors.
Notes on using Anton Bauer batteries and their capacity indication.
Outlines the fundamental steps for preparing and starting a shooting session.
Explains how to adjust contrast pixel-by-pixel for improved image detail.
Covers the process of recording video and audio onto the camcorder's tape.
Lists compatible DVCAM cassette types and notes on their usage.
Details the basic operations for recording footage onto the camcorder's internal VCR.
Instructions for recording external video signals when an input board is fitted.
Guide for recording simultaneously or exclusively to an external VCR.
Explains how to insert new scenes into recorded footage, even at any tape position.
Methods for reviewing recorded footage and audio, including recording review.
Covers setting and displaying counter values, time codes, and user bits.
Procedure for setting eight-digit hexadecimal values for user bits.
Instructions for setting time code recording methods and initial values.
Explains the drop-frame mode for correcting time code discrepancies.
Steps to ensure continuous time code during back space editing.
Procedure to maintain time code continuity after recording interruption.
Synchronizes the time code generator with the camcorder's real time clock.
Details on synchronizing video and time code signals using gen-lock.
Guide to using the ClipLink function for efficient shooting and editing.
Instructions on using the TAKE button to record time codes for editing points.
Procedure to continue recording in ClipLink mode from a previous stop point.
Overview of the four types of information displayed on the viewfinder screen.
How to switch between normal, basic menu, and advanced menu displays.
Explanation of the standard icons and information shown during normal operation.
Details on current settings and status information displayed via the MENU switch.
Describes the basic menu operations and settings for camera functions.
Detailed breakdown of items and settings available in each basic menu page.
Explains how to access and navigate the advanced menu options.
General procedures for operating the advanced menu, including resetting.
Illustrates how video output and viewfinder images vary with 16:9/4:3 and VF SCAN settings.
Information on using setup files to configure specific shooting conditions.
Procedure to load factory preset or user-defined setup files.
How to modify settings within setup files for picture quality.
Instructions on saving modified settings as user files or onto tape.
Explanation of functions for recording and recalling camera settings.
Procedure to load menu settings from recorded video tape.
Steps to save current camera settings onto a tape.
How to review recorded camera settings from tape during playback.
Overview of the VCR menu operations and available settings.
Procedures for adjusting white balance for accurate color reproduction.
How to save and recall custom white balance settings.
Utilizing built-in white balance presets for quick adjustment.
Steps for adjusting the camcorder's black balance for optimal performance.
Configuration of electronic shutter speed, clear scan, and EVS.
Adjustments to improve viewfinder visibility and image clarity.
Procedures for adjusting lens parameters like focal length and iris.
Guide for adjusting the distance between lens flange and image plane.
Methods for controlling aperture automatically, manually, or instantly.
How to adjust iris sensitivity trimmer for auto iris mode.
Instructions for using the macro function for close-up shooting.
Recommended settings for various shooting conditions and effects.
Easy push-button function to designate and adjust an active skin tone area.
Procedure to adjust color within a designated target area.
Crucial guidelines for safe and proper operation of the camcorder.
Covers lens fitting, unit covering, operation/storage, viewfinder, impacts, shipping, and care.
Explains image artifacts like vertical smear and white flecks inherent to CCD sensors.
Procedures for cleaning video heads and understanding warning system indicators.
Guides to diagnose problems and provides detailed technical specifications.
Lists optional components, system configurations, and ClipLink function details.
Definitions of technical terms used throughout the manual.
