Why do menu item settings change accidentally on my Sony DVR?
If menu settings are changing unexpectedly on your Sony DVR, it may be because you unplugged the power cord while adjusting the menu or the brightness of the LCD monitor. Adjust the menu again. To prevent this, avoid unplugging the unit while making these adjustments.
What to do if a menu item is not available on Sony DSR-45/45P?
A menu item might not be available on your Sony DVR for several reasons: * The REMOTE/LOCAL switch may be set to REMOTE. Set the switch to LOCAL before adjusting the menu. * If REC MODE on the VTR SET menu is set to DV SP, some menu items will be disabled. Change REC MODE to DVCAM. * Some menu items are only accessible in EE mode or playback mode. Ensure the unit is in EE mode or playback mode. * Some items on the TC/UB SET menu are only available if TC MAKE is set to PRESET. Set TC MAKE to PRESET. * Some menu items are unavailable when the REC/SAVE switch on the cassette inside the unit is set to SAVE. Set the switch to REC.
How to fix Sony DSR-45/45P when it operates by itself?
If your Sony DVR is operating by itself, it might be because COMMANDER on the OTHERS menu is set to WIRELESS, and a Sony Remote Commander with command mode set to VTR4 is being used nearby. To resolve this, set COMMANDER to CONTROL S.
What to do if the Remote Commander does not function with my Sony DSR-45/45P DVR?
If the Remote Commander isn't working with your Sony DVR, the setting of COMMANDER on the OTHERS menu might be incorrect. Change the COMMANDER setting to match the device you're using.
Why does my Sony DSR-45/45P turn on automatically when I connect it to the AC outlet?
Your Sony DVR might be turning on automatically when connected to an AC outlet because AC ON MODE on the OTHERS menu is set to POWER ON. Change it to STBY. Also, if there's a cassette inside and the TIMER selector is set to REPEAT or REC, set the TIMER selector to OFF.
What to do if playback pause mode is released and the tape forwards on Sony DSR-45/45P DVR?
Set FROM STILL on the VTR SET menu to STOP on your Sony DVR. If you do so, the unit will go into the stop mode after the playback pause mode continues for the interval set in STILL TIME.
How to fix Sony DSR-45/45P when it starts recording/playback by itself?
If your Sony DVR starts recording or playing by itself even when the REMOTE/LOCAL switch is set to REMOTE, the TIMER selector might be set to REPEAT or REC. Set the TIMER selector to OFF. Also, if LOCAL ENBL on the REMOTE menu is set to other than NO KEY and COMMANDER on the OTHERS menu is set to WIRELESS, the unit responds to signals from the Remote Commander even though the REMOTE/LOCAL switch is set to REMOTE. Change the setting of LOCAL ENBL or COMMANDER.
Why is there no picture on the LCD monitor of my Sony DVR?
If there is no picture on the LCD monitor of your Sony DVR, the CHARACTER DISPLAY (LCD) selector has been set to ON (BLACK BACK). Set it to ON.
How to fix the low recorded level on my Sony DSR-45/45P DVR?
To fix a low recorded level on your Sony DVR, adjust the INPUT LEVEL selector on the rear panel of the unit to achieve an optimum level, based on the sound output level from the player (refer to the player’s instruction manual).
How to stop Sony DVR from going into standby mode automatically?
If your Sony DVR goes into standby mode automatically after an hour of inactivity, AUTO STBY on the OTHERS menu is likely set to ENABLE. Change this setting to DISABLE to prevent the unit from automatically turning off.
Crucial guidelines for safe operation and maintenance.
Details the key capabilities and digital recording formats of the unit.
Identifies and explains the controls, indicators, and connectors of the unit.
Covers connections, settings, procedures, and functions for playing tapes.
Covers connections, settings, procedures, and functions for recording tapes.
Details procedures for fine-tuning the timing accuracy of editing operations.
Explains how to set, display, record, and play back time codes and user bits.
Describes how to synchronize the unit's internal time code with an external source.
Guides on adjusting video signal phases for accurate synchronization and output.
Details the process of copying tapes, including time codes, using the DUP function.
Lists common problems and their solutions for the unit.
General| Recording Format | DVCAM, DV |
|---|---|
| Storage Medium | MiniDV cassette |
| Video Input | Composite, S-Video |
| Audio Input | XLR, RCA |
| Video Output | Composite, S-Video |
| Audio Output | 2 x XLR (balanced), 2 x RCA (unbalanced) |
| Audio Format | 16-bit PCM |
| Recording Time (DV) | Up to 276 min (with PDV-184ME) |
| Remote Control | Yes |
| Video Signal System | NTSC |
| Input/Output | IEEE 1394 (FireWire), Composite, S-Video, XLR, RCA |
| Recording Time (DVCAM) | Up to 184 minutes (with PDVM-40ME cassette) |
To Next Page
