EasyManua.ls Logo

Sony DVP-NS905V - User Manual

Sony DVP-NS905V
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERVICE MANUAL
US Model
Canadian Model
DVP-NS755V
AEP Model
UK Model
DVP-NS705V/NS905V
E Model
DVP-NS915V
Russian Model
Saudi Arabia Model
Middle East Model
Australian Model
New Zealand Model
DVP-NS905V
CD/DVD PLAYER
DVP-NS705V/NS755V/
NS905V/NS915V
RMT-D146P/D147A/D147E/D1470/D147P
SPECIFICATIONS
Photo: DVP-NS905V (Silver type)
System
Laser: Semiconductor laser
Signal format system:
DVP-NS755V: NTSC
DVP-NS915V: NTSC/PAL (To change the
color system)
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (44 kHz: –2 dB
±1 dB)/Super Audio CD: 2 Hz to
100 kHz (50 kHz: –3 dB ±1dB)/CD:
2Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT L/R (AUDIO) 1/2 jacks
only
(LINE OUT L/R (AUDIO) jacks only)
(AEP, UK, Russian)
) (EXCEPT AEP, UK, Russian)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO/Super Audio
CD: 103 dB/CD: 99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT (AUDIO) 1/2: Phono jack/
2Vrms/10 kilohms
DIGITAL OUT (OPTICAL): Optical
output jack/–18 dBm (wave length:
660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
5.1CH OUTPUT: Phono jack/2 Vrms/
10 kilohms
COMPONENT VIDEO OUT(Y, P
B/CB, PR/
C
R): Phono jack/Y: 1.0 Vp-p/PB/CB, PR/
CR: 0.7 Vp-p/75 ohms
LINE OUT (VIDEO) 1/2: Phono jack/
1.0 Vp-p/75 ohms
S VIDEO OUT 1/2: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.3 Vp-p (PAL), 0.286 Vp-p
(NTSC)/75 ohms
General
Power requirements:
110 V AC, 60 Hz
120 V AC, 60 Hz
220 V AC, 60 Hz
22
110–240 V AC, 50/60 Hz
0–240 V AC, 50/60 Hz
See page 1-1 for further information
Power consumption:
15 W
16 W
17
18 W
W
See page 1-1 for further information
Mass (approx.):
DVP-NS705V/NS755V:
2.6 kg (5
47
/
64
lb)
DVP-NS905V/NS915V:
2.8 kg (6
3
/
16
lb)
Operating temperature: 5 ° C to 35 ° C
(41
°
F to 95
°
F)
Operating humidity: 25 % to 80 %
Supplied accessories
Specifications and design are subject to
change without notice.
ENERGY STAR
R
is a U.S. registered mark.
As an
ENERGY STAR
R
Partner, Sony
Corporation has determined that this product
meets the
ENERGY STAR
R
guidelines for
energy efficiency.
DVP-NS705V/NS905V: PAL (NTSC)
Outputs
(
AEP, UK, Russian:
EXCEPT AEP, UK, Russian:
Jack name: Jack type/Output level/Load
impedance)
LINE OUT (AUDIO): Phono jack/2 Vrms/
10 kilohms
DIGITAL OUT (OPTICAL): Optical
output jack/–18 dBm (wave length:
660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
5.1CH OUTPUT: Phono jack/2 Vrms/
10 kilohms
LINE OUT (VIDEO): Phono jack/1.0 Vp-p/
75 ohms
S VIDEO OUT: 4-pin mini DIN/Y: 1.0
Vp-p, C: 0.3 Vp-p (PAL), 0.286 Vp-p
(
NTSC
)
/75 ohms
Check that you have the following items:
•Audio/video cord (pinplug × 3 y pinplug
× 3) (1)
•Remote commander (remote) (1)
•Size AA (R6) batteries (2)
Dimensions (approx.):
DVP-NS705V/NS755V:
430 × 74 × 257 mm (17 × 3 × 10
1
/
8
in.)
DVP-NS905V/NS915V:
430 × 77 × 257 mm (17 × 3
1
/
8
× 10
1
/
8
in.) (width/height/depth) incl. projecting
parts

Table of Contents

Questions and Answers

  • K
    Karen HarrellAug 14, 2025
    Why is there no sound on my Sony DVP-NS905V DVD Player?
    • A
      Ashley LewisAug 14, 2025
      If there is no sound from your Sony DVD Player, try the following: * Reconnect the connecting cord securely. * If the audio signal does not come through the DIGITAL OUT (OPTICAL or COAXIAL) jack, check the audio settings. * If you are playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.”
  • E
    eric18Aug 17, 2025
    Why is the sound volume low on my Sony DVP-NS905V?
    • K
      Kimberly MelendezAug 18, 2025
      If the sound volume is low on your Sony DVD player, it may be because the sound volume is low on some DVDs. The sound volume may improve if you set “AUDIO DRC” to “TV MODE”. You can also set “AUDIO ATT” in “AUDIO SETUP” to “OFF”.
  • A
    Anna JimenezAug 21, 2025
    Why does the remote not function with my Sony DVP-NS905V DVD Player?
    • C
      Christopher KramerAug 21, 2025
      If the remote for your Sony DVD player is not working, the batteries in the remote may be weak, there may be obstacles between the remote and the player, the distance between the remote and the player may be too far, or the remote may not be pointed at the remote sensor on the player.
  • J
    jonathan03Aug 25, 2025
    What to do if there is no picture/picture noise appears on Sony DVD Player?
    • S
      Steven TorresAug 25, 2025
      If there is no picture or picture noise appears on your Sony DVD Player, try the following: * Reconnect the connecting cord securely. * Check the connection to your TV and switch the input selector on your TV so that the signal from the player appears on the TV screen. * If the picture output from your player goes through your VCR to get to your TV, please try connecting your player to your TV’s S VIDEO input. * If the color system of your player does not match with that of your TV, change the color system of the player. * If you have set “COMPONENT OUT” in “SCREEN SETUP” to “PROGRESSIVE” even though your TV cannot accept the signal in progressive format, set the COMPONENT VIDEO OUT/SCAN SELECT switch on the back panel of the player to INTERLACE.
  • C
    Christopher HerreraAug 28, 2025
    Why surround effect is difficult to hear on Sony DVP-NS905V?
    • S
      Stephen MorrisAug 28, 2025
      If the surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track on your Sony DVD player, check the speaker connections and setting. The 5.1 channel sound may not be recorded on the disc being played.
  • M
    Michael HendersonAug 31, 2025
    Why MP3 audio track cannot be played on Sony DVP-NS905V?
    • M
      Michael SmithAug 31, 2025
      If the MP3 audio track cannot be played on your Sony DVD player, it may be because the DATA CD is not recorded in the MP3 format that conforms to ISO9660 Level 1/Level 2 or Joliet, the MP3 audio track does not have the extension “.MP3,” the data is not formatted in MP3 even though it has the extension “.MP3,” the data is not MPEG1 Audio Layer 3 data, or the player cannot play audio tracks in MP3PRO format.
  • H
    herrerarobertSep 3, 2025
    Why does the sound come from the center speaker only on Sony DVP-NS905V DVD Player?
    • T
      Thomas PeckSep 3, 2025
      If the sound comes from the center speaker only on your Sony DVD player, it may be because, depending on the disc, the sound may come from the center speaker only. You can also set “SURROUND” to “OFF”.
  • K
    Krystal SchroederSep 6, 2025
    What to do if the subtitle language cannot be changed on Sony DVP-NS905V?
    • S
      Stephanie MorganSep 7, 2025
      If the subtitle language cannot be changed or turned off on your Sony DVD player, try using the DVD’s menu instead of the direct selection button on the remote. Multilingual subtitles may not be recorded on the DVD being played, or the DVD may prohibit the changing of the subtitles.
  • J
    John KochSep 12, 2025
    Why the angles cannot be changed on Sony DVD Player?
    • N
      Nancy GonzalesSep 12, 2025
      If the angles cannot be changed on your Sony DVD player, try using the DVD’s menu instead of the direct selection button on the remote. Multi-angles may not be recorded on the DVD being played, the angle can only be changed when the “ANGLE” indicator lights up on the front panel display, or the DVD prohibits changing of the angles.

Sony DVP-NS905V Specifications

General IconGeneral
Progressive ScanYes
DAC24-bit/192kHz
UpscalingNo
Video OutputComponent, Composite, S-Video
Audio OutputCoaxial digital, Optical digital
Supported Disc FormatsCD, DVD
Video Formats SupportedMPEG-1, MPEG-2

Related product manuals