Sony FCB-CX12E - Page 55

55
Specifications
Power requirements/Power consumption
6 V to 12 V DC/2.7 W (3.4 W)
Weight Approx. 146 g (5.2 oz.)
Dimensions 44.8 × 46.9 × 76.8 mm
(1
13
/16 × 1
7
/8 × 3
1
/8 in.) (w/h/d)
Design and specifications are subject to change without
notice.
FCB-EX12E/P, CX12E/P
Picture elements FCB-EX12EP/CX12EP: Approx.
380K pixels
FCB-EX12EP/CX12EP: Approx.
440K pixels
Horizontal resolution
550 TV lines (WIDE end)
Lens 12× zoom
F= 3.7 mm (WIDE) to 44.4 mm
(TELE), F1.6 to F2.5
Zoom movement speed
(NTSC)
Optical WIDE/Optical TELE
1.4 sec (Focus Tracking ON)
1.2 sec (Focus Tracking OFF)
Optical WIDE/Digital TELE
3.3 sec (Focus Tracking ON)
1.2 sec (Focus Tracking OFF)
Digital WIDE/Digital TELE 2.0 sec
(PAL)
Optical WIDE/Optical TELE
1.4 sec (Focus Tracking ON)
1.2 sec (Focus Tracking OFF)
Optical WIDE/Digital TELE
3.8 sec (Focus Tracking ON)
1.2 sec (Focus Tracking OFF)
Digital WIDE/Digital TELE 2.5 sec
Focus Movement time
∞ to Near 0.5 sec
Digital zoom 12× (144× with optical zoom)
Angle of view (H)
Approx. 48 degree (WIDE end) to
Approx. 2.8 degree (TELE end)
Min. working distance
290 mm (WIDE end), 800 mm
(TELE end)
Sync system Internal/External (V-Lock)
Min. illumination 0.5 lx/1/60 sec (NTSC), 1/50 sec
(Typical value)
(F1.4, 50IRE) 0.03 lx/1/4 sec (NTSC), 1/3 sec
(PAL) (Typical value)
Recommended illumination
100 lx to 100,000 lx
S/N ratio 50 dB (Weight ON)
Back light compensation
ON/OFF
Electronic shutter speed
FCB-EX12E/CX12E:
1/4 sec to 1/10000 sec (20 steps)
FCB-EX12EP/CX12EP:
1/3 sec to 1/10000 sec (20 steps)
White balance AUTO, ATW, Indoor, Outdoor, One
Push WB, Manual WB, Outdoor
Auto, Sodium Vapor Lamp (Fix/
Auto)
Gain Auto/Manual
(–3 dB to +28 dB, 16 steps)
Max. Gain Limit
(6 dB to 28 dB, 12 steps)
3D noise reduction
ON/OFF
(level 5 to 1 / OFF, 6 steps)
Color Enhancement
ON/OFF
Aperture control 16 steps
Preset 6-POSITIONS
Serial interface VISCA protocol (CMOS 5V)
9.6 Kbps, 19.2 Kbps, 38.4 Kbps, Stop
bit, 1 bit
Video Output VBS: 1.0 Vp-p (Sync negative),
Digital (ITU-R BT656 equiv.)
Comforms to LVDS output
Interlace
Storage temperature/Humidity
–20 °C to +60 °C (–4 °F to +140 °F)/
20% to 95%
Operating temperature/Humidity
–5 °C to +60 °C (23 °F to +140 °F)/
20% to 80%
Power requirements/Power consumption
6 V to 12 V DC/2.4W (3.1 W)
Weight Approx. 146 g (5.2 oz.)
Dimensions 44.8 × 46.9 × 76.8 mm
(1
13
/16 × 1
7
/8 × 3
1
/8 in.) (w/h/d)
Design and specifications are subject to change without
notice.