Need help?Do you have a question about the Sony FCB-EV7520 and is the answer not in the manual?
Details the camera's image sensor technology and pixel count.
Explains the Image Signal Processor (ISP) functions and output capabilities.
Describes the camera's optical zoom capabilities and aperture.
Covers safe usage of software, operation, storage conditions, and unit care.
Explains phenomena specific to CMOS sensors and lenses, like rolling shutter and ghosting.
Identifies lens, connectors, and tripod screw hole on the camera module.
Introduces camera control via VISCA Commands and the timing chart.
Describes basic operations like Power On/Off, IF Clear, Address Set, and Lens Initialize.
Explains the 30x optical zoom, digital zoom, and various zoom modes.
Details Auto Focus, Manual Focus, and their available settings.
Lists various white balance modes including Auto, ATW, Manual, and specific lamp modes.
Describes AE functions like Full Auto, Shutter Priority, Iris Priority, and Manual.
Explains Spot Exposure Mode, Exposure Compensation, and Slow AE Response.
Covers High Resolution Mode, Aperture Control, Backlight Compensation, and VE.
Details Defog mode, HLC for highlight correction, and MinimumShutter.
Covers Noise Reduction (NR), High Sensitivity, Variable Gamma, and Gamma Offset.
Explains Color Enhancement, Temperature Reading, and StableZoom features.
Describes Image Stabilizer and its hold function for blur reduction.
Explains Low-Illumination Chroma Suppress, ICR Mode, and Auto ICR.
Details Freeze, Picture Effect, E-Flip, and LR Reverse functions.
Covers Memory (Position Preset), Custom Preset, and User Memory.
Explains how to change initial camera settings using register commands.
Covers setup for Privacy Zone Masking and Motion Detection.
Outlines capabilities like number of zones, colors, and interlocking controls.
Explains commands for setting mask parameters and colors.
Describes function capabilities, frame setup, and alarm settings.
Outlines the three main steps required for firmware version upgrades.
Explains shifting to maintenance mode and binary transmission of firmware.
Describes the final steps to complete the firmware update process after maintenance mode.
Provides dimensional allowances for housing design related to the eclipse feature.
Displays the camera's relative spectral response across different wavelengths.
Details initial settings, custom preset options, and backup capabilities for camera functions.
Tabulates the operational conditions for various lens modes across power states.
Lists White Balance modes and their operational status across different states.
Details Exposure modes and their operational status.
Shows the operational status of various functions across different modes.
Introduces the RS-232C control protocol and VISCA communication.
Explains the format and components of a VISCA communication packet.
Describes Acknowledge, Completion, Error messages, and command cancellation.
Covers setting addresses, network changes, IF_Clear, and version inquiries.
Provides a table summarizing commands, messages, and their comments.
Lists camera messages for command status, errors, and network changes.
Details commands for controlling camera power, zoom, and digital zoom.
Lists commands related to focus control, AF sensitivity, and modes.
Covers commands for setting white balance, auto exposure, and shutter.
Details commands for controlling iris, gain, and brightness.
Lists commands for exposure, high resolution, noise reduction, and gamma.
Covers commands for video effects, image stabilizer, and ICR modes.
Details commands for memory, presets, titles, mute, and privacy zones.
Covers commands for motion detection, color gain, hue, and gamma offset.
Details commands for extended exposure compensation, aperture, AutoICR, and HLC.
Lists inquiries for power, zoom, focus, AF, IR correction, WB, and gain.
Covers inquiries for AE modes, shutter, iris, and brightness positions.
Lists inquiries for AE response, defog, HR, NR, gamma, and sensitivity.
Covers inquiries for reverse video, freeze, effects, flip, and ICR modes.
Details inquiries for memory, display, and stabilizer status.
Lists inquiries for mute, privacy zone, motion detection, and focus position.
Lists inquiry commands for minimum shutter and HLC settings.
Provides block inquiry commands related to lens control, including zoom and focus.
Lists block inquiry commands for camera control, including WB, AE, Iris, Gain.
Covers block inquiry commands for functions like ICR, Stabilizer, Freeze, and Privacy Zone.
Details query commands for AF, MD, AE response, and color settings.
Lists query commands for compensation level, defog, and display brightness.
Covers query commands related to color hue and other reserved functions.
Details shutter speed values and iris settings from F1.6 to CLOSE.
Provides gain and gain limit values in dB and steps.
Details brightness settings, exposure compensation values in dB.
Provides reference data for optical zoom ratio and position.
Shows digital zoom ratios and position data for combine and separate modes.
Explains baud rate settings and monitoring output modes.
Details settings for LVDS output, zoom limits, and StableZoom.
Covers register settings for focus trace, AE parameters, defog levels, and extended modes.
Provides technical details on the CMOS sensor, lens system, and zoom capabilities.
Lists specifications for shutter speed, white balance, gain, and noise reduction.
Details specifications for exposure, aperture, AE, VE, Defog, HR, NR, and video output.
Lists power requirements, mass, dimensions, and operating temperature/humidity.
Explains the LVDS interface for video signal transmission and data format.
Details the LVDS data format for double mode operation.
Shows a circuit example for an LVDS receiver in single output mode.
Provides pin assignments for LVDS receiver ICs in CMOS output mode.
Details recommended cables and image output format (Y, Cb, Cr 4:2:2).
Shows synchronized codes for SAV and EAV in active and non-active video areas.
Illustrates synchronized codes for interlace systems (SMPTE 274 M).
Shows synchronized codes for progressive systems (SMPTE 274 M).
Provides dimensional views of the camera module including mounting details.
Details the pin assignments for CN401 digital I/O and CN501 analog I/O connectors.
General| Brand | Sony |
|---|---|
| Model | FCB-EV7520 |
| Category | CCD Cameras |
| Language | English |
To Next Page
