Sony FCB-EV7520 - Register Setting; VISCA Communication and Monitoring Settings; LVDS, Zoom, and StableZoom Settings

Command List
FCB-EH6500(GB) A-EEP-100-11(1)
55
Register Setting
The register settings are enabled when the power is
turned off and then back on again. After turning the
power back on again, verify that the mode settings have
been changed.
Register No. Value
VISCA
Baud Rate
00 00
(Iinitial Setting)
9600 bps
01 19200 bps
02 38400 bps
03 115200 bps
Monitoring
Mode
72 01
(Iinitial Setting)
1080i/59.94
02 1080i/60
03 NTSC Analog Output
(Stop Digital Output)
04 1080i/50
05 PAL Analog Output
(Stop Digital Output)
06 1080p/29.97
07 1080p/30
08 1080p/25
09 720p/59.94
0A 720p/60
0B Reserved
0C 720p/50
0D Reserved
0E 720p/29.97
0F 720p/30
10 Reserved
11 720p/25
12 Reserved
13 1080p/59.94
14 1080p/50
15 1080p/60
LVDS Mode 74 00
(Iinitial Setting)
Single output
01 Double output
Zoom Limit
50 00-FF
(Iinitial Setting: 00)
Wide Limit
(0: Disabled)
51 00-FF
(Iinitial Setting: 00)
Tele Limit
(0: Disabled)
D-Zoom Max
52 00-EB
(Iinitial Setting: EB)
Max. digital
zoom ratio =
256 ÷ (256-Value)
“StableZoom” 53 00
(Iinitial Setting: 00)
Off
01 On
Temperature Reading Conversion Value
(Reference Value)
Reading Value
pq (hex)
Temperature
Conversion
Value (ºC)
FB −8 to −2
00 −3 to +3
0A 7 to 13
14 17 to 23
1E 27 to 33
28 37 to 43
32 47 to 53
3C 57 to 63