25 (E)
Errors that may occur in bins [XXX-
****
]
The messages have the following format:
XXX-
****
where “XXX” indicates the bin number, and “
****
” indicates the error
code.
Error codes and their meanings are listed below.
See the illustration “Bin numbers for error message display” on page 20(E) for
bin numbers.
Error codes and their meanings
Non-fatal errors
0011: The elevator tried to extract a cassette but failed.
0012: The elevator tried to load a cassette into the bin but failed.
0021: The elevator loaded a cassette into the bin, but the bin cannot
recognize the cassette is in it.
Errors that may occur in IF-373 board [F73-
****
]
The messages have the following format:
F73-
****
where “
****
” indicates the error code.
Error codes and their meanings are listed below.
Error codes and their meanings
Fatal errors
0011: The board is not installed in the appropriate slot.
Non-fatal errors
0012:The board is not ready for operation.
Errors that may occur in the bin controller [BIN-
****
]
The messages have the following format:
BIN-
****
where “
****
” indicates an error code.
Error codes and their meanings are listed on the next page.
To Next Page
Loading...
