Appendix
26 (E)
Error codes and their meanings
Non-fatal errors
When using D-2 format VTRs
0001: The bin unit, corresponding to bins No. 01x to 04x is not connected
to the bin controller or is not identified.
0002: The bin unit, corresponding to bins No. 05x to 08x is not connected
to the bin controller or is not identified.
0003: The bin unit, corresponding to bins No. 09x to 12x is not connected
to the bin controller or is not identified.
0004: The bin unit, corresponding to bins No. 13x to 16x is not connected
to the bin controller or is not identified.
0005: The bin unit, corresponding to bins No. 17x to 20x is not connected
to the bin controller or is not identified.
0006: The bin unit, corresponding to bins No. 21x to 24x is not connected
to the bin controller or is not identified.
0007: The bin unit, corresponding to bins No. 25x to 28x is not connected
to the bin controller or is not identified.
When using DVCAM format VTRs
0001: The bin unit, corresponding to bins No. 01x to 07x is not connected
to the bin controller or is not identified.
0002: The bin unit, corresponding to bins No. 08x to 14x is not connected
to the bin controller or is not identified.
0003: The bin unit, corresponding to bins No. 15x to 21x is not connected
to the bin controller or is not identified.
0004: The bin unit, corresponding to bins No. 22x to 28x is not connected
to the bin controller or is not identified.
0005: The bin unit, corresponding to bins No. 29x to 35x is not connected
to the bin controller or is not identified.
0006: The bin unit, corresponding to bins No. 36x to 42x is not connected
to the bin controller or is not identified.
0007: The bin unit, corresponding to bins No. 43x to 49x is not connected
to the bin controller or is not identified.
When using Betacam-SP or S-VHS format VTRs
0001: The bin unit, corresponding to bins No. 01x to 05x is not connected
to the bin controller or is not identified.
0002: The bin unit, corresponding to bins No. 06x to 10x is not connected
to the bin controller or is not identified.
0003: The bin unit, corresponding to bins No. 11x to 15x is not connected
to the bin controller or is not identified.
0004: The bin unit, corresponding to bins No. 16x to 20x is not connected
to the bin controller or is not identified.
0005: The bin unit, corresponding to bins No. 21x to 25x is not connected
to the bin controller or is not identified.
0006: The bin unit, corresponding to bins No. 26x to 30x is not connected
to the bin controller or is not identified.
0007: The bin unit, corresponding to bins No. 31x to 35x is not connected
to the bin controller or is not identified.
To Next Page
Loading...
