Specifications
30 (E)
Specifications
General
Power requirements
120 V AC, 60 Hz
(for USA/Canada)
220/230/240 V AC, 50/60 Hz
(for Europe)
Power consumption
5A (for USA/Canada)
3A (for Europe)
(excluding VTRs)
Dimensions 600 × 1980 × 1090 mm (w/h/d)
(23
5
/8 × 78 × 43 inches)
excluding projecting parts
Mass 250 kg (551 lb 2.5 oz) (excluding
VTRs, bin units and cassettes)
Electrical and mechanical characteristics
Number of storable cassettes
depends on their format and the
number of VTRs
See the list “VTR formats and
corresponding maximum numbers of
cassettes” on page 6(E).
Number of mountable VTRs
up to 6
Remote control interface
RS-232C/RS-422A
(with VCC cart control protocol)
Parallel I/O interface
D-SUB 50 pin
Environmental conditions
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Storage temperature
–40 °C to +60 °C
(–40 °F to +140 °F)
Relative humidity
25 % to 80 % (non-condensing)
Supplied accessories
Power cable 1
Operation manual 1
Maintenance manual 1
Installation manual 1
Blank panel 5
Extension board (EX-362) 1
Adaptor plug 1
Number sheet (for Betacam and S-VHS) 1
Number sheet (for D-2) 1
Number sheet (for DVCAM) 1
Nylon rivet 32
Plug holder 1
+B (5 × 10) screws
(for attaching the blank panel) 10
To Next Page
Loading...
